conartist2k1

which of these boards has select fire (semi, full auto, possibly more modes like 3sb)

stupidlikeaf0x

Both. The XSF comes with modes stock. With the T-board, you can get the upgrade chip with modes. The T-board still comes out cheaper even with the upgrade chip. Besides, you don't even need the modes becuase it's so fast already.

__________________
Complete timmy parts blowout!

bobide

where can i find some info about the t-boards upgrade chip? I hadn't seen it on their site, i probably wont get it, but i'm curious.

__________________
05 PROMASTER , 14" Macdev Matchstick, Kila Drive, Zentriam Valve, ICDU ram, CCM no-rise, Sonic lpr

pimpin balla

xsf only has semi and auto

Mr_Pain

Ok, thanks that's mostly what I wanted to know. I think that there is a way to install eyes in the stock trigger. I have done some small circut stuff before and it should not be to hard 1 inferred led and 1 inferred reciver that when the beam is not cut will not let you shoot. Sounds simple enough.

__________________
You can fix anything with a screwdriver and a bigger hammer.

---------------------

Black spyder compact 2000 converted to an autococker

stupidlikeaf0x

The only way to have eyes with a stock board is to use the eye board and eyes from a TES. The hard part isn't getting the eyes installed and everything, the problem is getting the eyes to work with the stock board. Unless you get an eye board, or have a blank chip to code, it won't work...as far as I know. Some guy from pbn was working on an eye board to work with the stock board, but no proof was ever shown.

__________________
Complete timmy parts blowout!

Mr_Pain

ok, let's look at eyes as a swich. If the swich is on(no ball in the chamber) you cant shoot, and if the swich is off(ball in chamber) you can shoot. the key is to finde a place on the board that when the swich is on/off will controll weather you can or cant shoot.
Like you sayd the hardest part is finding that spot and I thought thrue this, the only problem is I dont have as much time on my hands as I did before I started work.

__________________
You can fix anything with a screwdriver and a bigger hammer.

---------------------

Black spyder compact 2000 converted to an autococker

stupidlikeaf0x

I'm sure if there was a place on the board that would allow that, it would have been found by now. The only way to do it is either an aftermarket board, or an eye board that works in conjunction with the eye board. Try talking to Xyxyll from pbnation about it. He had something in the works about eyes but I don't remember exactly what it was or what progress he made.

__________________
Complete timmy parts blowout!

[^_^x]

I dont like either of those eye covers but to each their own.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90