Thread Tools

**2ffu** · September 22nd, 10:58 AM

http://www.xsfadvantage.com/product_info_spyderkit.html good deal?

**stupidlikeaf0x** · September 22nd, 12:38 PM

No. The T-board is a better deal. See my sig or scenariodreams.com

**dhill0413** · September 22nd, 12:48 PM

wow thats awesome...what kind of pressure are those spyders running at though(in the video) cuz they look low pressure or something.

**ElementPB126** · September 22nd, 02:21 PM

Yea get the t-board better deal. And now I think you can get a chip for full auto and ramping for it, talk to damonwill on pbn.

**dhill0413** · September 22nd, 02:22 PM

video of the t-board or shens.

whatsthe cost of an xsf board for say a spyder esprit?

pimpin balla · September 22nd, 03:28 PM

130 and its way better than the other boards to me cuz its full auto and it comes w/ a 50g microswitch and eyes and eye covers

**Stan** · September 22nd, 04:13 PM

the t board has all the seam things, except for eye covers and a 50 grans witch, but you can buy one for 2 bucks, so that not a problem, and the tboard is 60, thats 70 less and all you get extra id eye covers and a full auto capablitity, which shopuld never be used, unless you suck hardcore

pimpin balla · September 22nd, 04:15 PM

where would the wires run through on the tboard for the eyes

**bobide** · September 22nd, 04:30 PM

they run where ever u put them. U drill the holes for your eyes and then u can A) have the cord for the eyes come up out of the grip panels or B) guide the eye cord through your trigger frame and have it come out near your detents.

And T-board is better imo. I mean $70 and i can get a mirco switch from them too (yes u can i saw it myself

) then some actually GOOD looking eye covers are like $40 TOPS. THe XSF has the saddest excuess for eye covers i've ever seen....

**2ffu** · September 22nd, 04:33 PM

they make a ramping chip for spyders?

**Stan** · September 22nd, 04:54 PM

i highley doubt it, i havent heard of one yet, it would eb cool if they ah done, but they probobly dont as of right now

pimpin balla · September 22nd, 08:05 PM

where are eye covers for spyders at besides the xsf?

**PaiNtBaLLeR_200** · September 22nd, 09:20 PM

i have shot the xsf spyder and it really is as fast as the video is showing. BUT if you have the stock bolt, prepare to feel like your shooting an m-16. the recoil is bad. But just throw in a Spudnk'l bolt, or something of the like and you should be fine.

**bobide** · September 22nd, 09:23 PM

U can use intimidator eye covers (the sweetest eye covers every made)

**stupidlikeaf0x** · September 22nd, 10:29 PM

Would you rather have eye covers that look like these

or eye covers that look like these

T-board it is!

**bobide** · September 22nd, 10:57 PM

i know, its really not that hard a choice

pimpin balla · September 23rd, 10:12 AM

i need a new board bad but i have to buy a new mask first cuz mines a piece, lol.

**Mr_Pain** · September 24th, 12:44 AM

ok, I'm kinda wondering what eyes are, are they(it?) inferred sensers that implant in the chamber that run to your electronic trigger to prevent chops? If that's what it is then I can probly put it in myself and buy the componets from raidoshack. Anyways I'd like to know what exacly what they are, thanks.

**bobide** · September 24th, 09:55 PM

Well kinda Mr.pain. U see they are inflarred sensors in the chamer (if u do it urself make sure that the bulb isn't all the way into the chamber or u'll break it) and they prevent chops BY telling the board there is no ball. See u NEED the board, the stock board CAN NOT use eyes PERIOD. However if u get a t-board or xfs kit u can install the eyes by urself if u feel the need.

**stupidlikeaf0x** · September 24th, 10:50 PM

There is another option for eyes besides the XSF or T-board. However, they're bounce beam not breakbeam. What you can do is try to find the eye board and eye from a Dragun TES and install that. It's been done before. But the T-board is much more reliable, not to mention faster.