wickedgame1409

Yea so me being the stereo typical non mainstream type of person did the stupidest thing i bought a [Do not evade the swear filter - thanks, medic] spyder E-99 avant spyder promises u the world on the box but after a couple of days with it it wasnt so great

i mean its built extra well but the thing that bugs me is someone will comenext to me with a flatline and pick people off like flys while the ballls im shooting plummet to the ground

now i was told to buy nitrous (birthday dam i love them)

the question is A) what do i need for nitrous
B) Is the Dye Boomstick A pain in the ass or an ass kicker
C) New bolt (old one scrapes the inside of the gun)
D) any other way to make this gun deadly freaking accurate

Help Is greatly appreciated


IM me if u can AIM = Wicked Game 1409

Thanks For reading

JG.

its nitrogen, nitrus if for cars

a hpa tank go to www.xpaintball.com and look for them ull get a nice lesson on hpa
its ok but its not the best. $50<get a cp barrel $100<get a stiffi
get a tigershark bolt or if ur rich get a aka bolt
regulator get a cp regulator

wickedgame1409

whats a good size for nitrogen
47/3k

and is there any size that would fit in a 20oz pouch so i could run a remote line

2ffu

get

68/4500
cp reg
stiffi barrel
rocket vavle
acp blue bolt
apoc stiker
switch mods
apc trigger


don't run a remote

rOOt=bEEr

dose the tiger shark bolt actualy increaser the guns performance noticably?

MedicDVG

What is your velocity set at? Flatlines are expensive gimmick barrels - some folks swear by them and some swear at them. An E-99 is a decent marker.

In terms of the boomstick --- That is a very expensive barrel for little improvement. You would be better off with a J&J Ceramic, CP one piece, or SP teardrop or progressive. IT makes little sense to put a $100 barrel on a spyder -- as much as I love them, there are better things to do to it.

I like the tigershark bolt as well. It will give you about 5-8 fps better then the stock bolt and it won't mar up the inside of your marker.

Nitrogen (more comonly knows as HPA) is just compressed air, all you need is a tank and you screw it in just the same as your CO2. With HPA you get more consisant FPS.

If you read the "ultimate spyder" sticky, there are all kinds of upgrade ideas there.

__________________

KingFikiElectra

Heh

Just check out my sticky.

__________________
If you are for the resistance - SAY VIVA LA FIKI In your sig.
If you are armenian. Show it...
Don't You Wish You Were HYE?

skinny_k

fiki to the rescue

spyshark

Well first off do not believe that you need a HPA tank to shoot that maker of yours.Spyders work great with co2 even in the cold man.Check your paint to barrel match if it is not right they will not shoot worth a crap.Get a barrel down the road ,maybe you just need to tune the gun properly and get some practice it takes awhile to become a good shot at different distances.

__________________

Spec74

Screw the tigershark bolt... get the new ACP Blue bolt

__________________
My setup
Spyder Xtra body *** CiP Assult Block *** Bob long LPC *** Omega Valve *** CP 12" barrel *** Kapp twist cocking rod *** 32* Spring Kit *** AKA lightning Bolt *** Vaporworks Feed *** Palmer stab reg *** TKO drop *** Macroline kit *** E-Frame *** 68/4500 tank *** Revi w/ X-board

Future upgrade
50 gram microswitch *** uncapped board *** ACE *** ACP hammer (whenever that is) *** Slasher trigger *** Anno *** Milling
=====================================
WTB: Tank Regulator