Thread Tools

**rxpman100** · November 27th, 12:16 AM

Hey all..ive been having a little bit of problems with setup that i have with chopping, and im not real sure what the problem is..any help will be good..thanks..Here is my setup: Imagine: Anti Chop Bolt: Halo LCD backman: 14"TearDrop: 32D low rise feedneck: CIP Sweet Spot trigger: Dye Sticky3's: and im still running off of Co2(20oz)...I have changed up paints and have new batts in my hopper, adjusted the volocity and im not sure if it has to do with my co2 or what..thanks..D

**visionimpulse2k** · November 27th, 12:21 AM

get a regulator and valve and lower ur pressure! that could help.

Or, get a T-board..it has eyes so u wont chop nearly as much

**N8ive_Snoborder** · November 27th, 02:06 AM

Spyder Imagine

does the low pressure chamber do anything??? or is a P.O.S. to make more sales??

**visionimpulse2k** · November 27th, 02:11 AM

no..a new one will be the same as the stock one.

**N8ive_Snoborder** · November 27th, 02:52 AM

so is it good?

Cali Guy 14 · November 27th, 03:53 AM

check detent. Half to time they are dirty or worn out, save urself some money and replace em, u should do it every 15-20 or so cases, well i do at least.....i mean a 5 buck part that solves a bunch of probs

**rxpman100** · November 28th, 03:59 PM

okay thanks for the help..i will check the detents...what are some good regulators that people are using on the imagines that seem to work well...send me a pic or some links..

**Spec74** · November 28th, 08:19 PM

Well since you're using Co2 i suggest using a ergo reg or palmer. if you're gonna use an ergo get a valve also since ergo's only work 600psi and below. palmer is all great since it works great with C/A also but it's expensive

**Stan** · November 28th, 10:23 PM

wat kind of paints are you using, high quality stuff, or teh ****ty wally world stuff, becuz teyh paint makes a hella difference.

Cali Guy 14 · November 28th, 10:55 PM

tru that. A timmy w/ white box is as good as a sypder.

**Oscarine** · November 29th, 04:13 AM

My Bro uses a Imagine '04 he changed the springs (Lighter), 6-Stage Expansion Chamber, Shocktech Bolt, and a Reloader and it doesn't chop on him stock board only does Auto at 13 BPS I believe but anyway that setup was sufficient, still running CO2, and even with eratic spiking due to excessively cold weather and the added fun of wierd spiking due to expansion chamber it still does ok.

**rxpman100** · November 29th, 11:53 AM

As far as the paint goes..in the summer i can get by with using some cheaper stuff like Zap and wally stuff(like 34 bucks for 1500) and in the winter i usually try and use Worr paint because of the antifreeze in it..and i like the way it busts...when i play serious games i usually will use Evil..One of my close stores has stopped carrying the Worr and they have something else called anarchy..but i havn't used it yet..any comments?

**KingFikiElectra** · November 29th, 03:39 PM

Probably the detent. Clean it. If not that then polish your striker and make sure your not using crap paint. Also if it still is chopping then try to clean the gun as well as possible by take everything out of the body and soaking it in soapy water and rinsing it followed by lube or oil. To prevent further chopping try to clean the individual parts aswell. and make sure that there are no scratces in the guns internals itself.

Thread Tools

View more Paintball photos