Thread Tools

**spydershutter68** · December 29th, 02:09 PM

Does it matter what kind of stage 6 chamber i need or does it have to be a Spyder. I was looking a this 32degreese one for about 35 bucks and i was woundering if that would fit onto mine.

**Error** · December 29th, 02:34 PM

I would advise against 32 degrees just because a lot of their stuff isn't very good. no for the most part it shouldn't matter go to any site and look in the expansion chambers section I don't think you will find many gun specific expansion chambers.

**spydershutter68** · December 29th, 02:44 PM

aight thanks for the help.

**bobide** · December 29th, 10:31 PM

ooops, my bad, i recommened 32* to him. Well i didn't pretend to know much about expansion chambers.

**spydershutter68** · December 29th, 11:23 PM

Can u take off the chamber by unscrewing the expansion from the adapter, then underneath the chamber is a bolt thing, can u unscrew that then place the new one in. Then screw it into the new chamber, then connect it to the adapter. Also do u need it if u play indoors.

**bobide** · December 29th, 11:37 PM

Yes u can unscrew it from the verticle adapter thingy. That bolt thing is called a fitting/air fitting. It can be unscrewed. After that screw the new chamber into the VA (verticle adapter) and screw the fitting into the gun. U might need a new fitting (in a different shape, ur shop can install them, and carries them)

And it helps u indoors or out.

**C0ntractK1ll3r** · December 30th, 10:40 AM

http://cgi.ebay.com/ws/eBayISAPI.dll...category=47238

this is the one i got, cant tell you if its any good yet because i havent put it on yet.

**skinny_k** · December 30th, 11:03 AM

^^yeah i have thaqt 1 on my gun works like a charm. plus check the review it got like 9.2/10 or summin, i would definatly reccomend it.

**C0ntractK1ll3r** · December 30th, 11:36 AM

Quote:

Originally Posted by skinny_k

^^yeah i have thaqt 1 on my gun works like a charm. plus check the review it got like 9.2/10 or summin, i would definatly reccomend it.

Nice, good to know.

**Snowsk5054** · December 30th, 11:49 AM

Isnt that the 32 degrees one? Looks like it...does it work really good?

**C0ntractK1ll3r** · December 30th, 11:50 AM

Quote:

Originally Posted by Snowsk5054

Isnt that the 32 degrees one? Looks like it...does it work really good?

No, its not the 32 degrees one.

**spydershutter68** · December 30th, 12:35 PM

Yeah it id if u go to dickssportinggoods.com they have the same exact one it's 32 degreese. BUt if u say it's not then i can't arguie with u

**C0ntractK1ll3r** · December 30th, 01:22 PM

lol maybe it is, my bad, there just isnt a name on the auction i got it from.

Yup your right, just looked

**bobide** · December 30th, 01:32 PM

Guys just to remind u, we can only post pb sites of www.xpaintball.com b/c they sponser us and also carry alot of the stuff anyway. Read the rules if u want to know any more.

**spydershutter68** · December 30th, 02:25 PM

Ok My bad.

**Snowsk5054** · December 30th, 02:36 PM

I thought that expansion chamber looked familiar...

**spydershutter68** · December 31st, 02:23 PM

Guyz will a stage 4 expansion chamber help my Spyder.

**bobide** · December 31st, 02:39 PM

yep, it will help u to. I think a 6-stage is a little better, but 4 is still good, better than the 1-stage u got now.

**Snowsk5054** · December 31st, 03:04 PM

Yeah, thats true...a 6 stage will help alot....the 4 will work, but you have more of a chance to get liquid co2 in your gun than a 6 stage....so I suggest the 6 stage...

Thread Tools

View more Paintball photos