Thread Tools

**AAA** · February 20th, 04:45 AM

Still a long way to go but then again it has come a long way.

EREX Pro
30 gram Trigger Switch
Dead on Paintball Universal Bullet Drop Forward w/UFA
Spudnuk'l nylatron bolt
Maddman Striker Mod
Bob Long Torpedo
Otter Adaptor Mod Block ( Full bore because no need to hold the spring with the Rocket Valve)
New Designs Volumizer
M3 barrel kit
Maddman Valve
32 degree Spring kit
Revvy w/Xboard
Generic HPA 68 3000 Tank
Polished Internals

Future Plans

Dark Horizon Spyder Titanium Hammer/wOtterSC Modification
Bob Long 600 pis Gauge
15 Degree Assault Block
Halo B Victory w/rip or Q Loader
Nitro Duck 88 4500
Custom Ebony Grips
SweetSpot Trigger
Custom Milled Body

**AAA** · February 20th, 02:08 PM

Speechless?

**bobide** · February 20th, 02:24 PM

naw, the forums just kinda slupping at the moment.

u got some very nice ups on that. 8/10

can u t-board it? I would recommend doing so.
dye sticky grips

***omenowner*** · February 20th, 06:30 PM

7/10 maybe get a halo or evo II and t board

**Cockerkid63** · February 20th, 08:17 PM

Truthfully it looks like a stock erex with just a drop and a tank...because of the picture that is like really dark but i give it an 8-10 on what u say are your upgrades.

**AAA** · February 21st, 02:33 PM

I appreciate the ratings.

Picture is a bit dark. After reading the last comment I thought maybe since I know it has all the parts that can be seen, I see them plainly in that photo. Then I went back and looked at a photo of stock EREX Pro again. To me, it's easy to see the barrel isn't stock. The Bob Long Reg is a lot different than the partially chromed gas thru grip that came on it and the expansion chamber is now black not chrome.
I guess on the bolt and other internals its on my word but that is the way with all markers posted here for rating.
That being said I took another lighter photo.

The t-board sounds good and I will have to look into it.

Not sure about the stickies, because the grip panels are so odd and the grip so heafty.

Ordered a black faced Bob Long 600 psi gauge to replace the stock one. It never has been very accurate, was in to high of increments for a LP setup and the white face stuck out like a sore thumb.

FYI: Incase any think I am a 3A fan or affiliate, I'm not. The three A's of my user name are from my company which has nothing to do with paintball. I play PB in what little time off I can get by with.

I started this project with a Spyder Victor but since finding a cheap E frame was next to impossible, I jumped at a chance to get the complete stock EREX Pro, with a faster ROF, for half that of a Kingman E frame alone.

**Gabriot** · February 21st, 09:16 PM

8/10

The board would be a good investment

**Jrow17** · February 21st, 10:16 PM

nice, 7.9/10

i didnt read the whole thread, but maybe a new drop cause i cant stand those bullet drops, but thats just an opinion...

**AAA** · February 22nd, 02:59 AM

Jrow17, I hear you there. I always liked the look of that drop till I got it on this marker. I think it's because the marker has such a blockish look ( I know, blockish look is out and curved mill work is in, so-1 to as much as 4 points from some raters right off the bat ) and the drop is one long curve that sticks out. Maybe I'll trade it out later.

Personal observation.

I was surprised looking at other markers in this section that had the nice mill work body, with only one or two parts over stock getting ratings of 8-9. Kind of sad when looks rate so many more points over upgrades. It's easy to go buy a stock marker and throw a derlin in it and add a reg or even just a drop and a nice loader. Heck those are very basic upgrades for most any marker, so I just can't see the reasoning in giving such ratings, even if the body looks good its still got very little personality or had much love.
Ok off my soap box.

**Dontay** · February 22nd, 07:44 AM

looks nice 7/10

**Cockerkid63** · February 22nd, 07:16 PM

ok now that i can c the pics...8/10 Nice Erex

**crustybug** · February 26th, 09:15 AM

nice i like it. i was gonna say from the thread name, if its stock my friends chops like an ak-47 in the ghetto. how duz youres shoot? otherwise 9/10

**AAA** · February 26th, 02:42 PM

Thanks crustybug. Never really had much of a chop problem and with all the ups I have next to none unless I out shoot the Revvy. I remember seeing more chops before I got the bolt but think that was my fault for not oiling the stock bolt enough.
I do see ball breaks in the barrel every so often though, about 1 in 200-400 balls or so and haven't nailed that down yet.

**oCRAZYSPRAYERo** · February 26th, 11:03 PM

Nice gun, i'd say 7/10 just because I'm not too much of a blowback fan but it's probly one of the better blowbacks, I haven't really heard much about the erex's

flash13brandon · February 27th, 01:48 PM

**chaoticprophecy** · March 2nd, 08:37 PM

Nice erex 8

**paintthecatBLUE** · March 6th, 02:27 PM

i have one of these too, and i must say that looks alot better than mine...

don't buy the t-board though unless you feel the need to shoot faster than 20bps. for those of you who don't know about e rex pros, (probablly everyone) the stock board is fully programmable with 4 different modes all the way up to 20 bps. and yes, this is a cheap electro gun as AAA said in his very first post. mine only cost me $60. you won't find performance like this for that kind of money anywhere else.

Thread Tools

View more Paintball photos