Thread Tools

**Smitty** · April 9th, 12:58 AM

Ok I finally done it. My black and blue tippy is no more. I have totally remodeled her for mil sim.

First I stripped it down to bare metal and and removed the raised lettering on the side and cut the left hand reciever for easier maintenance. The interals were polished with a silicon compound that make the internals smooth as a baby's butt. In one of the pics you can see the internals gleaming thru the cocking slot.
Next I made a magazine mock up kit to cover the front grip. It is 100% custom fabricated from some scrap metal that I cut, welded, grinded and milled to perfection.
After that I made the drop. Its a Machined piece of half inch OD stainless steel pipe. When I adjusted the drop I realized I needed a longer hose. So it looks like some macroline is gonna be installed.

Also This gun is equipped with the response trigger and fine tuned to put out about 15bps. It has a flatline barrel, 42mm red dot sight.
HaloB hopper and Crossfire 68ci/4500psi HPA tank. And to the speed ballers who want to bash milsim, go rate my impulse.

**Mortisdeum** · April 9th, 01:01 AM

Not bad at all

9/10

**mLuH** · April 9th, 01:01 AM

awesome job man. 9.5/10 i like it. but wheres the feedneck

**big_balla** · April 9th, 01:02 AM

That drop is crazy, do you use a remote? 9

**Smitty** · April 9th, 01:05 AM

The feed neck is in my box o' paintball crap and as for the drop, I need to make some minor adjustments to put the tank a little more parrallel to the ground. Im considering running a remote, but Leaning closer to the tank on the drop.

***localCO*** · April 9th, 12:02 PM

purty sweet 9/10

**Smitty** · April 11th, 11:31 PM

Hey rate my gat!

**Jester of Paint** · April 12th, 08:24 AM

9/10 i <3 it man

**seanness** · April 12th, 08:45 AM

cool tippy 9

**MR_CURTIS_47** · April 12th, 05:16 PM

I don't like it that much.6.7/10

***PaintballMisfit*** · April 12th, 07:01 PM

9/10. Cool tippmann.

juncha · April 15th, 06:49 PM

Gott abe the coolest milsim tippy i've ever seen. 9/10.

Almost prfect but i'd really, really, really like it if you were to get a custom anno job.

***CustomProDude*** · April 16th, 11:22 AM

Gosh Smitty, are you stupid? I still see DOZENS of open spots where you can bolt crap on! You're not done! *cough Click cough*

(9/10)

**Smitty** · April 16th, 05:22 PM

I was thinking of getting an RIS system on there and mounting a swiss army knife, just so Im ready for ANYTHING.

**chaoticprophecy** · April 16th, 10:22 PM

Really nice man. Your guns always look good. 9.5/10. Nice

Aust_Naio · April 16th, 11:14 PM

Really nice tippy... Crazy drop..

I gota give it a 8/10

RB · April 25th, 10:02 AM

Ohh smitty, I liked your blue/black one more, but that is still killer.

9/10

***Samsonovfan14*** · April 25th, 12:58 PM

looks cool 9/10

**Grand Lethal** · April 25th, 01:05 PM

Looks really nice. Extra points for doing most of it yourself.
9.5/10

**Paintball3691** · April 25th, 07:44 PM

9/10

i love the magazine