Thread Tools

**Kyle_18** · September 18th, 04:19 PM

I just got a new Bone Daddy BL, it came with a mask,a can of Co2,A Hopper, A glove(instead of a plug), and the barrell(it scews on the actual gun)
I was wondering what it was rated, oh by the way I got it for $239.99

-KDAWG

**DownButNotOut** · September 18th, 04:22 PM

Ripoff...I bet you bought it at like Walmart or Sports Authority...

-1/10

**Kyle_18** · September 18th, 04:47 PM

Up here in Alaska there really isn't to many paintball tourneys so we don't reall worry about how good are guns are. I was just wondering don't gotta be mean. And I bought it at Sentry Hardware, one of the few places that even carry painball stuff!

-KDAWG

**2ffu** · September 18th, 04:53 PM

i could have got that for like 80 bucks.

**DownButNotOut** · September 18th, 05:23 PM

My bad i didnt know you lived in Alaska.

well, Seriously it was Overpayed for, but i undertstand for the lack of serious playing/availablity up there.

Next time , be smart and try online

it will save you loads of cash.

**Fastecho419** · September 18th, 06:24 PM

Picture would be nice.

**Kyle_18** · September 18th, 07:23 PM

Well the thing is shipping is ridiculous! And it came with the Co2,Mask,Plug,Squeegee, barrel and adapter and 200 paintballs.... also i have a question i need answered fast! you know how you hook Co2 up to the tube under the trigger guard and it transfers it into the gun, well i was wondering if i ocould disconnect the tube and put the Ci2 right on the part where the tube connects, the gas adapter fits (the adapter that pierces the non-reusable tubes)

-KDAWG

**DownButNotOut** · September 18th, 08:12 PM

So your saying you want to take off the bottomline ( the Wire that runs the co2 into the gun ) and Run the c02 right into the gun?

**Kyle_18** · September 18th, 08:20 PM

Yes, Correct, I screwed the gas adapter into where the cable would go, and it fits. (don't worry there is no Co2 in the adapter)

**Kyle_18** · September 18th, 11:05 PM

Hello? Anybody? I was gonna go paintballing and I needed to know if this was going to work. Thanks

-KDAWG

**Dudeus** · September 18th, 11:24 PM

it will work but it wouldnt be that smart. i would suggest not doing it. but if you want to you can

**Tex** · September 19th, 11:42 AM

Hes going from a bottomline tank set up, as in running a hose from the front of the gun to below the trigger frame, to a vertical tank set up, as in disconnecting that hose and plugging the tank directly into the front of the gun.

Nothing wrong with that. Wont hurt anything. If its cold out, you will get better performance because the tank is vertical and liquid co2 will have trouble getting through the valve.

**dhill0413** · September 19th, 11:45 AM

itll work fine. and running vertical like Tex said will help with consistency and such with it set up like that.

**Kyle_18** · September 19th, 02:41 PM

Ok, Cool thanks for the help guys, I really appreciate it, oh and another Question, My mom is going to buy me two more painball kits so her boyfriend and my sister can play, what is the best two kits for under $245?

-KDAWG

**Kyle_18** · September 19th, 02:46 PM

OK, one more question, will the vertical setup use more Co2/Nitrogen?

-KDAWG

**DownButNotOut** · September 19th, 04:26 PM

Ok, i would HIGHLY suggest buying online, its cheaper and you have more of a selection, and i think the shipping would eventually even out...

Ill pm you a site with free shipping

**Kyle_18** · September 19th, 04:26 PM

Anybody else? Anybody at all?

**DownButNotOut** · September 19th, 04:28 PM

Check your pms

If you dont want to buy online, Tell me what the options are at your local store.

**Kyle_18** · September 19th, 06:15 PM

We have one store here in my area-it is Sentry Hardware and the Bone Daddy kit is the only kit they have-and the only gun they have and it is $245

-KDAWG

**Kyle_18** · September 20th, 10:07 PM

Come On....More opinions please!

Thread Tools

View more Paintball photos