Thread Tools

**BrightSpot** · January 6th, 08:26 PM

Quote:

Originally Posted by Zynister

Smart Parts makes the Teardrop, it is in the 40-50 dollar range. I havn't used one myself, but I hear a lot of good thinks about it.

ohh ok thnx

**paintballer1134** · January 6th, 08:39 PM

Personally I would get the teardrop over the razzor any day inless money was a problem. A reg is short for regulator as in the name it regulates the amount of Co2 or N2 coming into your gun. You can get reg that allows you to change the psi to the amount you like. HPA is short for High Pressured Air its sort of like Co2 except it is cleaner and it is not a liquid Co2 is a liquid that changes into a gas when it enters the reg or the expansion chamber whatever you have. N2 is not so it does not put unnessary strees on the internals of your gun like co2 does (thats why co2 tanks are cheaper.) If you have any more questions let me know and I will answer them to the best of my abbility.

**Zynister** · January 6th, 08:44 PM

Quote:

Originally Posted by BrightSpot

Hmm, could you please be a little more specific?

I dont know what a HPA is, or a reg... and any specific barrel??

HPA= High Pressure Air they are referring to getting a compressed air, but you would probably know it as a nitrogen tank. Example: http://xpaintball.com/dyethrotpres.html

Reg= Regulator, regulates the pressure that goes into your marker. Example: http://xpaintball.com/cupr04lare.html

**BrightSpot** · January 6th, 09:05 PM

Quote:

Originally Posted by paintballer1134

Personally I would get the teardrop over the razzor any day inless money was a problem. A reg is short for regulator as in the name it regulates the amount of Co2 or N2 coming into your gun. You can get reg that allows you to change the psi to the amount you like. HPA is short for High Pressured Air its sort of like Co2 except it is cleaner and it is not a liquid Co2 is a liquid that changes into a gas when it enters the reg or the expansion chamber whatever you have. N2 is not so it does not put unnessary strees on the internals of your gun like co2 does (thats why co2 tanks are cheaper.) If you have any more questions let me know and I will answer them to the best of my abbility.

Whoa! Thank you!

Very specific, thank you again!!!!

How does the psi thing work though? Is it the higher that your psi is the beter your gun is?

**paintballer1134** · January 6th, 09:22 PM

I cant really explain the psi thing to you but I can try my best. PSI=Pounds Per Square Inch you want your gun to run at a very low pressure most stock guns run around 300 psi or so but with different ups and mods you lower the pressure. But once you do a few mods dont buy a LP n2 tank cause it wont work. Hope this helps but this really isnt my area of expertice.

**BrightSpot** · January 7th, 06:59 PM

Quote:

Originally Posted by paintballer1134

I cant really explain the psi thing to you but I can try my best. PSI=Pounds Per Square Inch you want your gun to run at a very low pressure most stock guns run around 300 psi or so but with different ups and mods you lower the pressure. But once you do a few mods dont buy a LP n2 tank cause it wont work. Hope this helps but this really isnt my area of expertice.

by LP n2 do you mean low pressure tank?

**BrightSpot** · January 7th, 09:07 PM

WOW -.-" This is so unfair...MY HOPPER DOESNT FIT MY GUN!!!!!!!!

Ill brb and show you a picture....

**BrightSpot** · January 7th, 09:17 PM

It might look like it fits in the pictures here, but it dont

**Zynister** · January 7th, 09:28 PM

Quote:

Originally Posted by BrightSpot

It might look like it fits in the pictures here, but it dont

Ima take this sukka back

If it is close to fitting, try sanding down the inside of the feedneck, and then maybe a little on the hopper shell. And LP tank is low pressure tank, yes.

**BrightSpot** · January 8th, 09:21 AM

ohh ok thnx

i wasnt sure

**paintballer1134** · January 8th, 10:22 AM

Personally I wouldnt touch the feedneck I would work on sanding the hopper only. That is what I did with my Halo and it fits perfect.

**BrightSpot** · January 9th, 04:07 PM

ohh im getting this adapter thing now that goes on the hopper and into the feedneck and it is suppossed to work on any type of hopper

i hope this didnt sound too confusing x.x

**ToridXFast** · January 9th, 04:55 PM

i would say dont post stock its not bad 5/10 but dont waste 400 dollars in ups when you can get a higher end marker for that much.

**BrightSpot** · January 9th, 06:31 PM

...i mean in any type of hopper and any type of gun, it fits anything

**csreymann** · January 11th, 02:31 PM

4/10... looks clean but it's stock. You're not going to get far with a stock gun.

**BrightSpot** · January 12th, 04:13 PM

i dont care about how my gun looks, i just want it to be powerful and accurate

**fenix_freak** · January 12th, 05:06 PM

but you also want durable too

...4/10

**tytytytytyty** · January 12th, 09:44 PM

that gun is the pits dude u need so many upgrades you should get a angel or intimidatorir even a impulse intead

**fenix_freak** · January 12th, 09:51 PM

hey tytytytytyty....its an ok beginners gun...take it easy...not every1 can afford high end guns

**paintballer1134** · January 12th, 09:51 PM

Quote:

Originally Posted by tytytytytyty

that gun is the pits dude u need so many upgrades you should get a angel or INTIMADATOR even a impulse inStead

fixed ty I taking it easy on you cause we got the same name...jp