Igotshot

Here is my pride and joy. Specs are:

Black Rat LTD Impulse
WAS Equalizer Board
Integrated LPR
Mini Maxflow
Delrin Bolt
NDZ Ti Pull Pin
NDZ Rip Valve
NDZ Hammer Assembly
NDZ Slick Shot Ram Shaft
NDZ Mid Weight Hammer
Magnetic Blade Trigger
14in. Ultralight .688 bore (.692 coming soon)
No-Rise Feed Neck(fits Halo PERFECTLY)
Shocktech #3 Drop
CP 2k5 On/Off ASA
Black Dye Sticky 3's

Also have a Smoke Halo B w/Rip drive and a Crossfire 68/4500 HPA tank.





Enjoy!!

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

Huey69

8.5/10?

__________________
Taking a break....teamless for now

xPiZZeRx

Very nice work on the Impulse. Could use some work on listing the specs though, lol.

9.75 / 10

__________________
[CENTER][IMG]http://pic14.picturetrail.com/VOL533/3257352/6663276/89920367.jpg[/IMG]
[SIZE="1"][B][URL=http://www.pbnation.com/showthread.php?s=&threadid=1066296]Trust [ 48+ / 0- ][/URL]
[URL=http://www.*******.com/xpizzerx]PiZpace[/URL][/B][/Center][/SIZE]

Igotshot

LOL thanks Pizzer...I am posting at 12:30 in the morning..Keep them coming!!

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

2ffu

jesus christ is get that drop off.

rivit

nice..i might be gettin a rat jr..how much was the was? i give it a 9

__________________
TOXIC TRIX OWNER

rivit

Gabriot

8.75/10

Switch drop for a uni for impulses.

__________________
**** it all

kidpaintballer

yeah, it is the best rat LTD on pbf, sorry brockocoli

10/10 for impulses
9/10 for all other markers

__________________
Feedback

Igotshot

A drop is preference by the player..I like my gun tight and i dont think a rating should be affected by a drop because that is all player preference. But anyways...WAS is $150 and well worth it.

Just curious for those that gave a 8.5 what was it that made u pick that?? I dont see anything else i can do to it.. It is upped as much as i can at this point..I hope the rating isnt affected just because i have a drop..Thanks for the ratings guy keep them coming.

P.S I am not ranting or anything just curious

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

xPiZZeRx

New trigger frame, LP solenoid spring like I have, lol, stuff for your halo like Zenitram Delrin Drive Cone, battery pack, or 2 9v. adapter, Angry Board, etc. New Designz Ball Detents? New reg maybe, SPC CVS Mount just cause they are kickass, custom anno

__________________
[CENTER][IMG]http://pic14.picturetrail.com/VOL533/3257352/6663276/89920367.jpg[/IMG]
[SIZE="1"][B][URL=http://www.pbnation.com/showthread.php?s=&threadid=1066296]Trust [ 48+ / 0- ][/URL]
[URL=http://www.*******.com/xpizzerx]PiZpace[/URL][/B][/Center][/SIZE]

Igotshot

I like the trigger frame i have but do like the HSW I-Frames. I was thinking of putting in a LP Solenoid spring(just might do that), dont see a need for a different drive cone yet but a different board i will most likely get for my Halo. Pizzer i hate you cause i forgot about the CVS mount and now i just might have to look into it. Bout the reg ill stick with the maxflow until i run into problems(knock on wood). My stock detents are doing fine right now i get no double feeds. Im not sure if the Rat LTD's have different stock detents than the stock bodied imps. If they are the same then i guess mine are holding up well). Keep the ratings coming..

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

gamefaceowner3

9/10

pwnisher

8/10 nice marker, and the drop looks rad.

__________________
ICD Owner 00
---------------------------------------
Sporting a red b2k4 w/ pds (3mm eyes)
shocktech superfly bolt
bob long torpedo reg
bone break wiring harness
25g trigger switch
lapco twister lock feed neck
red dye stickies
blue led
---------------------------------------

703dEdLee

new trigger, frame if u want, and maybe feedneck
but 9/10 looks very nice

__________________
2k3 Blue Vision Impulse w/ Smoke Halo B
Equipped With a....
Eclipse magno blade trigger, Sticky Grips, SP on/off, Freak (.687 insert) 14", ND Volumizer cap w/ hammer, New Designz Front Cap, Rat Hammer, CCM No-Rise Feedneck, Torpedo Reg

Want
-CP Roller Trigger-Contract Killa or Dye Grips-AKA SCM LPR-CP Rail On/Off ASA-Delrin Bolt-Ti Pull Pin-Freak Inserts-

PM if u have any please

SP IMPULSE OWNER #26

Igotshot

Right now my trigger is perfect for me. Its magnetic and can be adjusted like any other trigger. I might get a I-Frame later on not sure yet. Just Curious why i would need another feedneck?? It is a Halo no-rise and fits my Halo B perfect so i dont see why i would another feedneck, but again its all preference. Keep them coming

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

Dudeus

9.6/10
otb frame (or i-frame), new trigger (IMO), and cp/aka reg

keep the drop IMO. i like it.

__________________

An eye for an eye, makes the world blind. - Gandhi

Igotshot

Thanks i really like the drop also. Im sure i would like the OTB frame cause its 90* i think?? Keep them ratings coming

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

MeatIs4Beating

Badass.

9/10

__________________


Mmmmmmm...Bawls...and meat...



Orange to Black Cyborg #150

Igotshot

I was messin with my WAS settings today, put my Debouce to 2 and loosened my magnet on my trigger so it was not so snappy and man it bounces like a crazy. This things rips with the debouce set low. Thanks for the ratings keep them coming

__________________
Was'ed Rat LTD
Integrated LPR, AKA Sidewinder Reg, Voodoo Bolt, NDZ Ti Pin, NDZ Rip Valve, NDZ Hammer Assembly, NDZ Detents, NDZ Eye Cover, Skinner LP Solenoid Spring, Blade Trigger, HSW V3 I-Frame, Powerlyte Scepter Kit, No-Rise Feed Neck, CP Rail, CP 2k5 ASA, Black Dye Sticky 3's
PBF Feedback

monkeysocks

thats a nice lookin gun 9/10

__________________
if your a jewish paintballer put this in your sig.
black ion
uni
hybrid feedneck
cp roller trigger