Thread Tools

**Presidente** · December 20th, 12:59 AM

SO FAR: smart parts twister neck, shocktech mini drop with original bottomline

UP NEXT: OTB frame, equalizer bolt, freak back w/ aa front

**wackwar** · December 20th, 01:02 AM

3/10
pretty much stock
5/10 w/ups listed

**MuddinPede_98C** · December 20th, 01:45 PM

Good place to start.

Here's what's to go:

WAS
NDz Equalizer bolt
Ti pullpin
NDz Hammer
NDz SS Ram-Shaft
NDz Ram Housing
SP LPR
Trigger (not needed if you get OTB)
Unimount

I'll give it a 4/10, cause it's pretty stock.

**Presidente** · December 20th, 02:41 PM

Kind of what I expected, thanks though.

***Alpha*** · December 20th, 04:44 PM

take a pic with your name on a piece of paper next to it.

**bobide** · December 20th, 05:13 PM

Get the OTB frame, THEN get WAs w/ vision. Then u'll be rocking.
Is that a tapeworm or something below the barrel? And whats on ur egg?

4/10

internals, all ndz, but i bet u know that if u've looked around in the sp section.

**Presidente** · December 24th, 02:33 PM

It's a hopper cover, got sick of taking apart and cleaning my egg so I got this off ebay pretty cheap. Get a lot of bounces, too.

There's a thread around here that has a pic of my gun and my name...let me find it...I think a mod (or myself) deleted it, ask flatliner about the pic he's in it too.

***Barber*** · December 24th, 03:38 PM

3.

Don't get OTB, the trigger is horrible and unless you are used to 90* frames you will hate it.

Get an I-frame instead. Don't get WAS, get the new vision board that ramps.

**Bubbahotep** · December 24th, 03:51 PM

3/10 for reasons stated above.

**TheBabyJesus** · January 1st, 01:12 PM

thats pretty nice even though it is stock
but i dont rlly like the "boxy" look
w/e 6/10

-Kev

SuperManD1v3 · January 3rd, 10:59 PM

Quote:

Originally Posted by MuddinPede_98C

Good place to start.

Here's what's to go:

WAS
NDz Equalizer bolt
Ti pullpin
NDz Hammer
NDz SS Ram-Shaft
NDz Ram Housing
SP LPR
Trigger (not needed if you get OTB)
Unimount

I'll give it a 4/10, cause it's pretty stock.

btw i give u a 5

**vpraidersfan1** · January 3rd, 11:35 PM

Quote:

Originally Posted by TheBabyJesus

thats pretty nice even though it is stock
but i dont rlly like the "boxy" look
w/e 6/10

-Kev

You and your "BOXY LOOK"

Anyhow 5.4/10 . They pretty much had it. New vision board ramps???

**CTPB** · January 5th, 09:45 PM

**Brockocoli** · January 7th, 07:28 AM

Quote:

Originally Posted by vpraidersfan1

You and your "BOXY LOOK"

Anyhow 5.4/10 . They pretty much had it. New vision board ramps???

Yes...i am a supporter of the new CS-designs BDS board...also called the CS-Vision board. It has really good vision and a ramping mode that allows the gun to ramp up to 19bps...

5/10...

CS-designs board
NDZ internals
EQ bolt
LPR (if you want, otherwise a tapeworm
Blade trigger or I-frame...(note: the CS-vision board WONT WORK in an I-frame unless you want to make some minor physical adjustments)

**Presidente** · January 7th, 08:36 AM

Thanks for the suggestions, I've revised my upgrades and here goes:

cs-vision board (don't know where to look for one, though)
EQ bolt
Blade trigger (forget the otb or iframe)
Maybe some dye stickies once old ones wear out
And a new barrel...maybe st!ffi

**Brockocoli** · January 7th, 09:02 AM

cs-vision board (get it at the place that sells RAT's)
EQ bolt=good
Blade Trigger=Great choice, im pretty sure they're all the same but i have a NDZ trigger...i think)
Stickies=Good choice
Barrel=if you want a kit go with Stiffi or Freak but if you want a single piece then an Ultralite or something i cant think of right now...

EDIT: Stiffi 1 piece

Thread Tools

View more Paintball photos