Thread Tools

**Oscarine** · April 7th, 06:48 PM

Newest Addition
Picking it up Sunday
#2 of 10
Better Pics and specs (got a box of stuff to add to it :P) to come!

**R3fl3x** · April 7th, 08:25 PM

hawt 10/10

**dhill0413** · April 7th, 08:39 PM

youve got the hottest cockers.

9.5

barrel kit

**Oscarine** · April 7th, 08:41 PM

I'm getting a Sanchez Orbium-1 system for it I'm probably gonna send it all in for Anno I'd like to get some sort of a theme going for it.

**bob005** · April 7th, 08:47 PM

how did you get that?

10

**bobide** · April 7th, 08:52 PM

um, wow. I patiently await better pics. So i can see the glory.
10/10

**Fubar2** · April 7th, 10:10 PM

jesus, 9.8/10 sammy trig.

**Pr0ph3t** · April 7th, 10:16 PM

holy hotness batman! 10/10

***DarkTamer*** · April 7th, 10:31 PM

damn you! you get all the sickest cockers!!

9/10 (cuz its an e1)

**Cocker16** · April 8th, 08:57 AM

Wanna trade lol. 10/10

**gamefaceowner3** · April 8th, 07:05 PM

nice cocker 9/10

**tmaxx_2.5** · April 8th, 08:36 PM

i'd hit it. 9.8/10

**proto** · April 8th, 08:40 PM

<3 10/10

**2ffu** · April 8th, 08:45 PM

i <3 your cocker

just needs an e2

**kidpaintballer** · April 9th, 03:51 PM

very very hot

9.5/10 (becasue of E1)

**Oscarine** · April 11th, 08:42 PM

I'll get some pics up at work tommorow. It needs Reanno, not many scratches, but generally a poor anno job to begin with and its really dull (IMO).

The previous owner was a younger guy and apparantly he figured he'd tighten everything in the front block with everything from scotch tape to superglue and throw in some Epoxy (improperly mixed thank god) inbetween =P

The sear solenoid had a broken wire, the 4 way solenoid wiring was taped together, it was missing some screws, and internally it had some stripped screws that held things like the sear pin in place as well as the trigger adjustments. Everything had paint all over, it didn't cock properly and was grinding because of no lubrication on the hammer. the Valve was gunked up to the point it had trouble moving the piston etc etc etc =P The inline reg is tarnished beyond all imagination and was recharging very slowly, plus had pressure creep.

The lack of removable feedneck is somewhat annoying.

Anyway eh... its going to be a labor of love getting it the way I want it :P

**bobide** · April 11th, 08:51 PM

so...just how much did u pay for this rare totally f-ed up cocker?

**Oscarine** · April 12th, 10:14 AM

$700, and so far I've dumped 12$s for an E-blade screw kit, which is all in all a good deal since I needed to replace some screws on the DC1 and I needed an extra frame screw for the '99 anyway. I also bought a pair of QEVs since it lacked them. I had a new bolt and shuttle made for it and a new bolt pin (the bolt pin that was originally used was a totally ridiculous design and I believe solid stainless steel pin, with a stainless steel sleeve to add the taper at the top which all in all was really heavy. I went with a completely titanium one piece pin now, anything less sturdy and I woulda worried about it since it needs to catch the hammer. I replaced the valve simply because the one in it seemed just plain worn somehow, the hammer could also use some love but its not a major issue and still works fine.

The Wiring required a little solder love which was fine. Everything but the reg cleaned up fairly nicely, but thats ok it now has a CP Shorty on it.

It shoots now, and pretty well actually, now that that is taken care of its off to be annodized in the next week or so.

so basically I had to dump an extra 100$ to get it working properly.

**P8ntballin Hobo** · April 12th, 10:20 AM

that is a creampie... 10/10

**txaggie08** · April 20th, 09:31 PM

oh lord i like that. how much are those bodies? 10/10