Welcom to TheAznInvazn's Mini Mart! Remeber, if you don't see anything you like, check back later, I update as things come in >.< and remember the rules...
- I don't ship first, end of story.
- Post before PM or be ignored
- I only ship to the Lower 48 States, sorry folks, just makes things easier.
- Mature seller, expect the same from buyer. Will not tolerate any form of immaturity.
- All prices are OBO unless otherwise specified!
- I take Cash, Money Orders, PAYPAL. I can take Visa, American Express, Discover, Master Card, and BANK Credit and Debit Cards through PayPal!
- Posted prices DO NO include shipping or PayPal fees unless otherwise specified.
- If you would like to know the shipping cost right away, post or PM me your zipcode so I don't have to ask for it
- I ship USPS, if you would like a different service, the shipping cost will adjust accordingly
- My Shipping costs include HANDLING FEES, gas and time isn't free.
- If you would like extra insurance or other additional services, you must pay for them yourself
- All my items are in their described condition. If your package is lost or damaged in transit, it's not on me
- If Cash is lost in while being mailed to me, it's not my problem.
- If mailing me your payment, please let me know the day you send your payment out. After being notified, I will put the desired item up as PENDING for ten (10) days. If ten (10) days have expired and I have not received your payment, it will be removed as PENDING and be open for public purchase.
- By posting here and/or PMimg me, you agree to all of my terms and conditions
- Also, I'm looking for paintball related gear, so offer up! (see WTB list for priorety items)
- If no pictures are given, or if you just want more, feel free to ask for them! I will take pics on request!
~WTB/WTT List~
Black Autococker Slider Frame
(guts included)
Spyder Pilot ACS
(red/black takes priorety, working condition, stock, no major damage)
Ricochet AK Hopper, 2KX Hopper or Apache in Smoke
(working condition, no cracks)
Black Bob Long Torpedo Reg
(working condition, minimal scratching)
AKA black Sidewinder in medium length and/or 2Liter
(working condition, minimal scratching)
JG BAR-10 Airsoft Sniper Rifle
~450 fps (coke can chrono), 3-9x32 illuminated crosshair scope (red with 11 intensity settings), harris style bipod, shimmed hop-up arm, spring spacer, teflon tape mod, stuffed stock, credit card mod, cut airbrake, and the trigger adjusted for a super light, super short pull. This is an exact Tokyo Marui VSR-10 clone, it can be upgraded with any VSR-10 parts!
Selling for $150
LIKE NEW Tamrac Photography Vest. Older model, in fantastic condition, has enough padded pockets for a lot of equipment.
Will sell for $45
LIKE NEW OD Green Tactical Hydration Assault Vest. Worn once, in brand new condition. 8 AMMO POUCHES, 3 LARGE CARRY-ALL POUCHES, 2 VINYL-LINED HYDRATION POUCHES (BLADDER NOT INCLUDED), MESH-LINED FOR COMFORT, HEAVY WEIGHT 600 DENIER POLYESTER, FULLY ADJUSTABLE TO ALL SIZES, ATTACHMENT STRAPS. All caps are specs taken from Rothco: Solid...Reliable...Steadfast
Brand new this vest Costs $57.99
Will sell for $55 and will throw in a BRAND NEW 1 liter bladder, two removable pistol magazine pouches (on the shoulders), and a tactical belt all for free!
Like New modified Airsoft mesh mask. Right cheek cut for a natural cheekweld against a rifle stock, and mesh replaced with mesh cut out from a fencing mask, and custom paint job. Mesh withstands any airsoft bb impact without warping (1200psi to be precise). Recommended that you wear safety glasses under them.
Selling for $10
Teal GameBoy Color with Motocross Maniacs 2
In fine working order, no major ware, only scratch on the lower right of the screen that's only visible if there's glare on the screen. Comes with the protector/carry case.
Selling for $10
Payment Options and Conditions
See below or above
Last edited by TheAznInvazn : June 21st at 01:39 AM.
Like New Vents mask visor. Used maybe twice, and in perfect condition.
Will sell for $10
Slightly used Head Wrap thing, one size fits all, Mossy Oak Camo pattern, in perfect condition. Will wash before shipped. Will sell for $10
Oakland Blast DVD! Skips towards the end, but you can fast forward or skip scene out of the problem areas. Selling for $10
Green Spyder ASA, SS hose, and Gas Thru Grip, came off of my Imagine. Works fine, some scratches, and the anno is a little faded, but it works, selling for $10
Random Spyder Parts, 2 velocity adjusters (1 old style one new style), 1 velocity adjuster screw, 1 Fatty style striker with o-ring and buffer, and 3 long valve springs (all different weights), will let all of this go for $5
Call Of Duty For the PC, both CD's, come with CD Key, will sell for $7.50
Call of Duty: United Offensive Expantion Pack for the PC, has both CD's, comes with CD Key, will also sell for $7.50
Gundam Zaku Figurine!!! Found 'em in my room, thought it was cool. Comes with everything in pic. Will sell for $5
LIKE NEW Courier Bag. Used maybe three times.
Will sell for $7.50
USED Elbow Skate Pads. In good condition, just dirty. I used them to play paintball untill I got my Eclipse Pads. Will wash before shipped.
Will Sell for $5.00
Lightwave 3D 8: Getting Started Guide: Model; Animate; Render; By Timothy Albee and Steve Warner. Teaches you the basics of Lightwave 3D 8, but is still useful even if you have a newer version. These types of books are surprisingly expensive, but I'll give it away for $35.
BNIB Rothco Military Style Combat Jump Boots. Never worn, in perfect condition, size 7.5. Full specs at Rothco G.I. STYLE COMBAT BOOTS $59.99 new, selling for $35
Used BDU Hot Weather pants, woodland pattern, size Medium-Short, small tear on the front of the right thigh, very small, can bearly see in pic. Selling for $10
Used Soft Padded Pistol Holster. Attaches to belt by veltro strap, has a quick clip or button for the draw, adjust able to most any pistol. Spare Mag puch on the front can holt two single stack magazines or one double stack magazine.
Will sell for $5.00
Used skateboard trucks and wheels. Hey! They're not broken, the wheels spin, and they're cheap!
Will sell for $7.50
BRAND NEW World of WarCraft: Rise of the Horde novel, written by Christie Golden. Never opened, never read, in mint condition.
Will sell for $3.50
LIKE NEW Nike beanie, reversable, knit, never worn, perfect condition. Selling for $15
Used Nike beanie, is decent condition, selling for $10
Used wooden forgrip and stock off of a real steel AK-47, in great condition, wood is not finished. No pistol grip though, selling for $20
Custom built Silencer/Supressor for paintball tuning and such.
THIS DOES NOT ALLOW YOU TO SHOOT PAINTBALLS! Yes, there's a hole going right through it, but if you attempt to shoot paint though it, all you'll get is a nasty mess, and possibly ruin the silencing feature. It drastically reduces the report your marker creates, making it possible to tune your marker while inside without disturbing other people. Just slip/ hold it over the tip of your barrel, and procede to dryfire. Will sell for $35
Mods for ALL Stacked-Tube Blow Back Markers (Spyder's and Clones)
Instructions for these modifications can be found at OtterSC Customs and the Spyder Forums, but by having the mods done by myself, you get a Money Back Guarantee. Also, all prices are firm, no exceptions, but trades are still welcome.
It has come to my attention that these mods basically give you the Spyder SE Valve System. They work the same way, and on the same principal.
Venturi Removal................- $0.50
Custom Spring Spacer..... - $0.75
Trigger Shim Job...............- $1.00
See Sear Shim Job
Sear Shim Job...................- $2.00
Polished Hammer..............- $2.50
See Ultra-Lite Hammer
Polished Sear....................- $3.00
Polished Bolt (metal only).- $3.50
See Ultra-Lite Hammer
Trigger Pre-Travel Adjust..- $4.00
Trigger Post-Travel Adjust- $4.00
High Flo Valve...................- $5.00
comming soon
UL Trigger (Egrip only)......- $5.00
Magna Trigger (Egrip only)- $5.50
High Flo Vertical Adaptor...- $5.50
comming soon
High Flo Valve Pin..............- $6.50
Still in design process...
Add PSI Gauge*................- $7.50
Hair Trigger (mech only)**.....- $10.00
Ultra-Lite Hammer***............- $10.00
Still in design process... Parts Test****......................- $1.50 General Maintenance*****..- $5.00 LP Tuning******..................- $20.00
Now, with my personal setup (Spyder Imagine), My marker works at about 200-300 psi, and that’s a HUGE improvement over stock. Stock Spyders I believe work at around 800 psi, so by getting the psi needed to operate you marker lower, you gain efficiency, and a lot of it!
STBB Mod Rules:
- I will NOT pay for shipping, you must cover it BOTH ways
- I will NOT refund money if your marker still functions with these mods
- Turn Around time is approx. 1-20 business days, depending on the (amount of) mod(s), and may take longer. Nothing is set in stone.
- *You can ship and provide your own gauge (1200 or 1500 psi rated for CO2 usage, 500-1200 psi for LP or HP HPA/Compressed Air tanks, and 400+ psi gauge for LP, only) with your marker, or I can buy a 1200 or 1500 psi gauge for stock, or 400+ psi gauge for LP, of my choice (model and size may vary) for an additional $18.00 (the cost of buying AND shipping a gauge to me)
- **Because the Hair Trigger mod minimizes the surface area the sear actually makes contact with the hammer, there is a greater possibility that the sear will fail faster than if left stock. Polishing the sear will fix the problem untill the sear wears down again.
- ***By reducing the mass of the hammer, inertia is lost, less force strikes the valve pin, causing a FPS drop. To counteract this, I suggest buying a Spring Kit, or one of my Spring Spacers
- ****I CAN test the items before sending back, depending if you send me your entire marker, or if the parts will fit my Spyder Imagine
- *****General Maintenance includes a complete disassembly, complete cleaning of all parts, replacing all damaged or worn o-rings and/or seals, relubing, reassembly, and a free Parts Test.
- ******LP Tuning can only be achieved after Venturi Removal, Polished Hammer and Bolt, High-Flo Valve, Valve Pin, and Vertical Adaptor, Ultra-Lite Hammer, the purchase of an aftermarket reg with a gauge at 400+ psi, or my PSI Gauge, and a Spring Kit. After obtaining all of the mentioned in some way (most/all can be bought aftermarket), I can tune your marker to the lowest psi while still maintaining the fps you desire aslong as it stays at or below 300 fps.
- I will ONLY repair/refund money if you give me solid proof (possibly video, could be something else) that your marker functions incorrectly
- If I unintentionally damage any part of your marker, I will notify you immediately so we can work out getting you a new part or something else
- All modified parts are under a 30 day limited warranty from the time I ship out. If any part of my mods should break, fail, or stop functioning under normal play, feel free to send it back to me for free repairing or replacing, or ask for a refund
- Warranty does not cover surface damages (nicks, scratches, etc), misuse, abnormal use, useing parts other than it's designed purpose, improper assembly, disassembly, re-assembly, or any further modifications attempted by anyone else besides myself (TheAznInvazn).
Ion Mods and Custom Work
Instructions for these modifications can be found all over the web, but by having the mods done by myself, you get a Money Back Guarantee. Also, all prices are firm, no exceptions, but trades are still welcome.
I can also do many custom mods, custom paint jobs, and dye things in custom colors for many different markers and other items, just ask me if I can do something and I'll see if I can do it, and we'll figure out prices and whatnot on the way >.<
Ion Mods
fdjizm's Stock Bolt Mod*.......- $5.00
Parts Test***.....................- $1.50
General Maintenance****..- $5.00
Tuning*****.......................- $20.00
Custom Work
VL "Touch-Force" Mod..........- $5.00
This mod adds a microswitch on the inside of any ViewLoader Force paintball hopper's raceway, so that when the switch is depressed (by a paintball) the paddles stop spinning. Makes for a great backup hopper for next to nothing and even a good beginner hopper. I currently use one myself for a backup.
Hard RapidFeed******.......- $8.50
Standard RapidFeed******- $8.50
UltraSoft RapidFeed******- $8.50
VLocity(Jr) UltraSoft Rapid Feed******- $8.50
Ion Mod and Custom Work Rules:
- I will NOT pay for shipping, you must cover it BOTH ways unless otherwise specified
- I will NOT refund money if your marker still functions with these mods
- Turn Around time is approx. 1-20 business days, depending on the (amount of) mod(s), and may take longer. Nothing is set in stone.
- *You must provide your stock Ion bolt for me to do this. This mod ONLY WORKS ON stock Ion bolts.
- **This is my very own custom mod, I created it, anyways, you must provide your own bolt (anything but L7, Nano and HollowPoint), and you can either ship and provide your own TechT Ion Back Plug, or I can purchase one for an additional $16.00 (the cost of buying AND shipping a plug to me)
- ***I CAN test the items before sending back, depending if you send me your entire marker, or if the parts will fit my EOS
- ****General Maintenance includes a complete disassembly, complete cleaning of all parts, replacing all damaged or worn o-rings and/or seals, relubing, reassembly, and a free Parts Test.
- *****I can Tune you Ion, Epiphany, or EOS to whatever psi you want (as long as it's withing operating perameters), adjust the dwell, and set the fps to whatever you'd like (at or below 300fps only).
- ******My RapidFeed System fits All Halo's, Reloader B's and B2's, Magna's, Pulse's, Revolution's, VL Force's and Eye-Force's, all Ricochet models, and any other hopper with the same lid dimentions, and any VLocuty or VLocity Jr shell with a bit of modding. The Hard keeps ALL paint in, but reloads a bit slow. The UltraSoft reloads very fast, but drops a few balls here and there. Each RapidFeed system is tested before shipping, so you will never get a "lemon". If you want a VLocity RapidFeed in something other than UltraSoft, than just ask, I'll make one for ya!
- I will ONLY repair/refund money if you give me solid proof (possibly video, could be something else) that your marker functions incorrectly
- If I unintentionally damage any part of your marker, I will notify you immediately so we can work out getting you a new part or something else
- All modified parts are under a 30 day limited warranty from the time I ship out. If any part of my mods should break, fail, or stop functioning under normal play, feel free to send it back to me for free repairing or replacing, or ask for a refund
- Warranty does not cover surface damages (nicks, scratches, etc), misuse, abnormal use, useing parts other than it's designed purpose, improper assembly, disassembly, re-assembly, or any further modifications attempted by anyone else besides myself (TheAznInvazn).
Payment Options and Conditions
- I don't ship first, end of story.
- Post before PM or be ignored
- I only ship to the Lower 48 States, sorry folks, just makes things easier.
- Mature seller, expect the same from buyer. Will not tolerate any form of immaturity.
- All prices are OBO unless otherwise specified!
- If you would like to know the shipping cost right away, post or PM me your zipcode so I don't have to ask for it
- I ship USPS, if you would like a different service, the shipping cost will adjust accordingly
- If you would like extra insurance or other additional services, you must pay for them yourself
- If your package is lost in transit, it's not on me
- I take Cash, Money Orders, PAYPAL, and Visa, American Express, Discover, Master Card, and BANK Credit and Debit Cards!
- Shipping and PayPal fees still apply unless otherwise specified.
- If Cash is lost in while being mailed to me, it's not my problem.
- If mailing me your payment, please let me know the day you send your payment out. After being notified, I will put the desired item up as PENDING for ten (10) days. If ten (10) days have expired and I have not received your payment, it will be removed as PENDING and be open for public purchase.
- By posting here, you agree to all of my conditions
- Also, I'm looking for paintball related gear, check out my WTB list up at the top of the page!
- If no pictures are given, or if you just want more, feel free to ask for them! I will take pics on request!
Azn Invazn's Gearbag Sale!!!
