[Pixcellerator]

Hey guys im new to paintballing, i just recently bought myself a Jt Excellerator of a buddy. We'll it has come to me having lots of problems.

the gun worked perfectly fine when i got it for at least 2 weeks.
then one day i went paintballing with my friends...and the gun was shooting the wrong way...what i mean is when i pointed at something, it shot the opposite direction...and this gun has never had this problem.but im thinkin it might have been those new paintballs i bought...i really dont know.

I decided then to clean the marker stupid me

I took the volumizer apart, the barrel, the striker... and now my gun is messed up totally

After a couple hours i finally put everything together and tryed to connect the co2, when i did the gas would go threw the gun and comes out like crazy...it wont stay on tight..i changed the o-ring..and nothing helped..so basically the co2 wont be locked on tight.and leaks like mad threw out the whole gun... what do you guys think?

Im thinkin i should go have a technician look at it, but im worried it will cost me alot.

Also in the past i have trouble disconnecting the co2 properly ..can u guys give me instructions on deactivating it...


Please Leave any help or comments.

Muchly Appreciated

[Tomba]

Before you should do much more take it to ur local pro shop.


Tom

[Homeless Box]

take it to your local proshop they dont usually charge much for gun repairs...10,15 dollars max

[butterjuice]

"Also in the past i have trouble disconnecting the co2 properly ..can u guys give me instructions on deactivating it..."

to take the CO2 out u just unscrew it unless u buy an on/off

[sharpeye3000]

best bet is to get it repaired by proffesionals get it to the shop

[Pixcellerator]

Originally Posted by 98cTomba98c

Before you should do much more take it to ur local pro shop.


Tom

Yea thats the only choice i really have.

[Ellis]

Take it to the shop, what they said.

[Pheonix]

same thing happened too me, check your instructions, make sure EVERYTHING is put back EXACTLY where it shuold be, my problem was 2 parts in my volumizer were switched around, and make sure that the valve stem (pin thingy) fits through the hole in the valve body (round thingy) nice and tight.