[Sn1p3r 84]

I have a 2006 piranha GTI e-force.Pretty new I got it for Christmas.Well my friend came over and I have a 9oz and a 16oz c02.He was shooting my gun and I went inside and all of a sudden the c02 all came out of the 9oz.I went to put the 16oz on and all the c02 just starting coming out.Like after you take your c02 off your gun but non-stop.So if you got anything to help me out I'd appreciate it.

[martix_agent]

sounds like you have two bad o-rings on the tanks. go buy some paintball o-rings at a sporting goods store, put them on the tank and you'll bet all set.

It's sorta a common problem because if you don't put the tank in at exactly the right angle, the threads chew up teh tanks o-ring.

[the_real_kaz]

Did the CO2 come out of the gun, tank, or asa (where they connect).

If it came out of the tank than you burst disk went and you'll need a new one. They are only like $1 and you can get them at any paintball shop.

If it came out of your gun. depending on the place it came out it is eaither your cup seal (another $1 part but you'll have to take the gun apart to get at), or a bad o-ring in the gun (a couple cents)

If it's comeing from the asa, than its just a bad o-ring on the tank. That's the easyest and most likely problem. Just get another o-ring and put it on.

[Sn1p3r 84]

I'm not sure but it sounds like its coming out of the medal hose that hooks into the asa.It has happened when i put my 9oz and 16oz in.

*EDIT*

I just put my 9oz on real quick cause it had a little c02 in it.The c02 came from in the gun and I'm gonna take it apart and look inside at the o-ring real quick.

[Sn1p3r 84]

Originally Posted by the_real_kaz

Did the CO2 come out of the gun, tank, or asa (where they connect).

If it came out of the tank than you burst disk went and you'll need a new one. They are only like $1 and you can get them at any paintball shop.

If it came out of your gun. depending on the place it came out it is eaither your cup seal (another $1 part but you'll have to take the gun apart to get at), or a bad o-ring in the gun (a couple cents)

If it's comeing from the asa, than its just a bad o-ring on the tank. That's the easyest and most likely problem. Just get another o-ring and put it on.

From what you have said I narrowed everything down and looked at all the parts and the only thing I can think it would be is the cup seal.I don't see how it can go bad or whats wrong with it but I have a spare one.

[evolkers2003]

If its the cup seal then it will be coming out of the barrel/feedneck. It you can hear the air out of the barrel/feedneck then replace the cup seal.

[the_real_kaz]

If it's the cup seal it could also come out of the back of the gun. As in the part where the bolt is cocked. My Piranha stated to do that and it was the cup seal.

[Sn1p3r 84]

Well I replaced it and atm I don't have any c02 right now to see if its working.So once I get my 20oz's in I will go fill em all up and test it out.