Thread Tools

steve22 · February 20th, 05:09 PM

yo i got a replacment valve and put in in and went to the local feild the gun held up great won a few games and i noticed the gun was firing a bunch of times with one pull of the triger and it was crushing the balls i broght the gun home cleaned it all up and it was firing like crazy i dont what happened the olny thing that i can thing could be is the decorative piece on the top behind the hopper and it got real loose and fell off but diddent realy notice the firing problem
all help is welcome thanks

***TheAznInvazn*** · February 21st, 12:36 AM

You're probably low on air or CO2.

Get a fill and you should be good to go

steve22 · February 21st, 10:13 AM

yo i just got it filled befor i left and to check i used anouth tank that what 3/4 full and the same thing happened
help please

***martix_agent*** · February 21st, 11:41 AM

lube it up, see if it helps. It could also be a low battery.

steve22 · February 21st, 02:30 PM

well it is a semi auto gun and i also tried lubing it up and the gun is going crazy when i hit the trigger once it than let it go and it gets about 50 shots off and it is crushing the balls

**txaggie08** · February 21st, 08:25 PM

low air.

***TheAznInvazn*** · February 21st, 11:09 PM

hmmm...

Try doing some of the Otter SC Customs mods, that should help with the airflow and efficiency.

Also, you might have a weak spring, get a spring kit and see if anything different happens, or just turn your velocity all the way up.

**txaggie08** · February 21st, 11:58 PM

oh hell....

I think the R6 actually has a basic regulator on it as well(if it's the fishy I think it is...). Turn it up as well

steve22 · February 22nd, 09:03 AM

if the regulator is the big allen wrench on the back that is almost all the way tight i will try messing with that part of the gun thanks

**txaggie08** · February 22nd, 11:56 AM

no the regulator is the foregrip on the gun... there should be an adjustment on the die if I'm not mistaken.

steve22 · February 22nd, 12:43 PM

is it under the plate on the fore grip what is the dye
thanks

**txaggie08** · February 22nd, 04:46 PM

a typo, the side is what I meant.

steve22 · February 23rd, 06:12 PM

well i was screwing around with it and decided to put the old sear in and it started working and it is working BUT every couple of shots it wll double fire not sure how to fix this any one no how the sear is supose to work and look.

***TheAznInvazn*** · February 23rd, 06:14 PM

the area that connects with the hammer should be square and neat. if it looks worn and founded off, try and polish it back to a nice edge.

steve22 · February 23rd, 06:56 PM

the sear is pretty square but on the gun it is worn on the frount side of the long hole that the sear goes through not sure if that does any thing?

***TheAznInvazn*** · February 23rd, 07:07 PM

The only part of the hammer that you should worry about is the edge closest to the back of the hammer.

steve22 · February 27th, 04:12 PM

the back of the hammer that rige is semi chiped how gental should i be when sanding and polishing the rige back?

***TheAznInvazn*** · February 28th, 09:51 AM

very gentle. you should only barely take off that black layer anyways.

steve22 · February 28th, 03:00 PM

the hammer its self? or the botom of the gun????????

***TheAznInvazn*** · February 28th, 03:20 PM

the hammer