[steve22]

yo i got my new vs1 a few days a go and i am wondering for those guy out there with a vs1 if you look behind the trigger do you see a plate or a little button i see a small button and my gun doent shoot because i think i need that small plate the trigger is not responding. cant find them anywere

thanks guys

[txaggie08]

You need to screw in the trigger screw that pushes on the switch. should be able to make that longer or shorter and have it fire.

[steve22]

its weird it looks like the trigger wouldnt make contact with that small button
i will try tightening it down

[paintballinkid6]

Exactly, it won't make contact unless you have that little screw in the trigger. Some guns have one where you actually put your fingers and you might be missing it.

[steve22]

finally it turns out that i am missing that flap or lever thatgoes in frount of the button. do you guys have any idea were i can get one i looked just about on every paintball site
plz
thank you

[kenny_1491]

I think you might have to replace your trigger switch. You can get them at radio shack for pretty cheap.

[steve22]

no the switch is fine it is the lever /flap that i need

[kenny_1491]

That's what I am saying, you might need to buy a whole new switch to get a lever for it, I don't think you can buy them separate.

[txaggie08]

oh the reed is missing? ah...

the may have a switch for you at radio shack that will work. Either jack the reed off of it or install the whole switch.

[steve22]

i couldent get the right size at the shack bt i did jack the lever and when i was taking the small casing it cracked and the thing brok in a bunch of pieces
i found thin would this work the (whole thing)

[steve22]

Sub Miniature Micro Switch 1 AMP @ 125 VAC MSW-22 - eBay (item 140217696522 end time Mar-28-08 16:14:36 PDT)

sorry for got to atach