[ShepardD]

Hello, I got my first marker, a TES, plus the eVulution electronic hopper. I also got the owners manual with the marker, and like others have said it sucks. I have never owned a marker before. I read all the post talking about how important it is to clean and oil the gun ect. How do I take this thing apart for mainteneance?

Is their anything else I should know that the "manual" neglects to inform the owner about it.

[JG.]

Not sure, try the dragun secton under "stacked tube blowbacks". You have a good first gun...when it works. There are threads in the dragun section that tell you all you need to know.

[paintballjunk12]

It should tell you how to take the bolt out in the manual

[dirtrider54]

Ok what you do is you take the back pin out, make sure you have a little pressure on teh bolt so everything doesnt fly out, so after you take everything out your going to have 7 peices laying on your table, teh bolt, a black bolt, a black rubber ring, the pin, a spring,a goldish rod, and the thing that hold everything in there. So the first thing your going to need to do is take the top bolt and wipe it down, after you wipe it down, your going to put oil on teh two o rings and the front. Now take the black bolt and put oil on the black oring on the front of that bolt, now put the silver bolt back into the top of the gun and put the back bolt on the pin towards the back of the silver bolt. Now you need to turn the gun on and hold the trigger down for the needed time and apply some presure on the top bolt tehn pull the trigger twice, now the bolts all the way back in. Now you can turn the gun off if you want. next take the sprin and put it in were the black bolt goes, and put the thick rubber oring thing on it, then put the golden rod into the spring. now put the back cap over it all, and put the silver pin back in.