[skinny_k]

my friend has a pirahna evo. A and the little thing that s under the barrel is where the co2 is leaking. He unscrewed it cause he thought there was paintb in it but there wasnt. He screwed it in and then put in the co2 and leaked out of that thing under the barrel. Plz help


p.s. the thing under the barrel has a hole in it (it has always been there).

[dfdtrumpet]

i've had this a couple times, you probably need a new o-ring in there. It may not even look like it needs one, but i know mine did. If thats not it, check all the other o-rings on the gun, then lube it up if nothing else works. Those are all the problems i had when that happend to me.

PS I have a Piranah too, older one, but prolly the same basic internals.

[skinny_k]

ok thanks ill tell him 2 try that.

[Pr0ph3t]

Oil
Cup seal
Oil cup seal
O-rings
Oil O-rings

[MiniMePeoN]

also make sure its in tight

[HuNtS]

make sure he put the cup seal in the right way... or it wont cup seal very good...lol

[Warpstoner]

Replace and oil the o-rings.

That's all you have to do.

[dfdtrumpet]

BTW that hole in the peice you pulled out is supposed to be there, i think it an expansion chamber.