mat420

Hello. You know that repeated sound the gun makes about twice per air tank and/ot when its almost out of air? Its like its studdering or something. Well I put a tank on my gun and went to shoot air and it did that noise until all of the co2 in the tank was gone...can it be my tank (i think the tank might be screwed up) or is it the gun? Im using a bone daddy. How do I turn my spring? It made that sound for like 30 seconds until my tank was empty..definitely didnt do it because my tank was out of air. Thank everyone I appreciate the help. Anymore info? How do I turn my spring? Where is the spring? It didnt make the noise last time I used the gun. Also once I put the tank on and all the air wa comin out..I might have not put it on tight enough though. someone help please

Skate and Paint

that sound is called burping, and it more than likelywas making it becuase u blew an o-ring. take the gun apart, relube everything and if there is a blown o-ring replace it and u should be good. almost all guns do that run off of co2 do that when they run out. and i dont know what your talking about with your spring...velocity maybe? if so it might be the hex bolt on the back. turn it to the right. but i dontk know much about bone daddys though

__________________
AO feedback
feedback

MR. Marsullus

neither do i.

is it a stacked tube blowback?

if you have recently taken it apart, you may have not put it together correctly and hit you vavle with the hammer.

__________________
Rate My:

Pro/carbine, Tigerstriped 98, Woods 98, Eddie Van Halen 98, and zigzag 98

mat420

is it a stacked tube blowback?
no idea.

the reason i mentioned the spring was because someone told me to try doing that on anothe forum.
thank you all for your help i appreciate it.

Torch

What kind of gun is it? It can't be much more than a tippmann, a spyder, or something like a spyder.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

Zeruel

A bone daddy is a spyder clone made by Gameface. I suggest you take your gun apart WITH your manual handy, and make sure you assemble it back together correctly. Also, check all the orings, make sure none of them are broken. Other than that it might just be your tank.

Zeruel

Torch

Sorry, I didn't see where it had the brand in the post.

Take Zeruel's advice. Also, when you have the grip frame off, look at the sear and also look at the hammer. Make sure they are not damaged. Look at your manual when you don't know what the sear and hammer are...The hammer may be called a striker.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

mat420

appreciate all of your help i'll have to try all of that stuff wehn i get bored
thanks alot.

mat420

what do i look up exactly to find a picture of where every peice of the gun goes (like they have in the manuals) i got no idea what im doing with these guns so i need a pic of where everything goes.