DeadWeight

Ok, I just got my Diablo Wrath yesterday with a used 48/3000 hpa tank. So I screw on the tank and I notice it has a leak behind the trigger, like sorta behind above it. I have absolutly no clue what could be causeing this, I assume a damaged 0-ring. But yea, I really would like some advice on how to fix this problem.

Gotenks64

Wrong section

__________________



Team site

http://tcats0.tripod.com/collateraldamage

Take a look!

DeadWeight

sorry

Homeless Box

Dissesemble and check all your bolt o rings

also i think this would go in the other markers section

__________________
WWW.TRUKZ.COM!

DeadWeight

I dont know if this has anything to do with my problem but I shot the gun even tho it was leaking and the velocity seemed like it was cranked up all the way and would curve drastically like after 20 ft. or so.

paintthecatBLUE

sounds like a solenoid problem... that is right behind and slightly above the trigger. but it could also be something simple like a hole in the hose because it got pinched by the body, or something like that. separate the frame from the body and then air it up, and see if you can find where the leak is. make sure you dont yank your eye wires out though...

edit: i forgot, this also applies to cockers, try turning your lpr down.

DeadWeight

heh yea, I really wish I could turn my lpr down if I knew how to (came with the crappiest manual ever)

intotheflats

Its the allen screw on the bottom of the reg.

__________________

mavsfan31

Have you replaced the o-rings yet?

__________________
John