i've noticed that there has been crap loads of "Wrath ups????" threads so i decided to help everyone out.
Custom Anodizing:
www.precisionpb.com They ano an entire marker for $60 or a per-peice price of $7.50 and do GREAT work. They also do color matching, so send in a paint chip or color sample and get great results.
Wrath Aftermarket Parts:
Alamo City Paintball:
www.alamocitypb.com
Bolts, Cup Seals, Bolt Pins, more soon
FBM Delrin Wrath Triggers:
www.fbmfactory.com
Trigger Mod:
http://www.pbnation.com/showthread.p...=&pagenumber=1
Trigger Switch Mods:
http://www.pbnation.com/showthread.p...hreadid=856551
http://www.pbnation.com/showthread.p...readid=1022251
Trigger Guard Mod:
http://www.pbnation.com/showthread.p...hreadid=894727
Aftermarket LPR Adapter:
The Wrath and O3 share many parts, and the LPR adapter is one of them, so if you have the mind to put on an aftermarket LPR, pick up the Zenitram O3 LPR adapter for $15 and an Autococker compatable LPR.
http://www.zenitram-mfg.com/ (Odyssey Upgrades>O3 LPR adapter)
Delrin Bolts:
http://zoompaintball.com/ (Sells BLACK delrin bolts)
http://www.pbnation.com/showthread.p...hreadid=846394
www.spudnukl.com
PROS: Self-lubrication. Roughly 27 grams.
Nylatron Bolts:
http://www.pbnation.com/showthread.p...hreadid=896352
PROS: Self-lubrication. Roughly 25 grams.
TFE Teflon Bolts:
www.spudnukl.com
PROS: Self-lubrication. Roughly 50 grams.
Wrath T-board:
http://www.scenariodreams.com
http://www.pbnation.com/showthread.p...hreadid=855370
Custom Triggers:
Do a search for pbnation users: Comcast and THE BETTERONE
Air Ram Mod:
http://www.pbnation.com/showthread.p...hreadid=864525
Autococker Vertical ASAs:
http://www.pbnation.com/showthread.p...hreadid=864525
(Scroll down- Straight and 15* ASAs with or without gauge ports)
Full Auto Mod: *Caution*
Above the top switch on the main board are two prongs. Placing a jumper on these will enable full auto mode. -Thanks to reddragun5 for supplying this info. More Here:
http://www.pbnation.com/showthread.p...hlight=%2Bauto
WARNING- This mod may cause damage to your board if not done properly!
Where to locate a "Jumper" for the full auto mod:
http://www.pbnation.com/showthread.p...3#post16550213
LCD to LED Mod:
http://www.pbnation.com/showthread.p...readid=1057378
Rubber Grip Mod:
Stock grips look shoddy? Rit Dye them! Takes a couple of hours (depending on the color and darkness you want) in hot (near boiling) water/dye. If you want your LCD screen area to remain clear, be sure to mask it off with hot glue etc. on BOTH SIDES. If you need a tutorial on dye, go here:
http://www.pbnation.com/showthread....threadid=452598
ABOVE: Dyed grips and a dyed Halo lid
Wrath Grip Discussion:
http://www.pbnation.com/showthread.p...hreadid=879998
Intimidator Detent Mod:
http://www.pbnation.com/showthread.p...hreadid=901890
Look for the post by squints88
*Also look at the bottom of page 6 of this thread for pics.
yes this was taken from pbn, but thought it would do much good on here
Official Wrath Ups and Mod Thread
