Thread Tools

**AErdman** · January 8th, 07:53 PM

Okay, I have a Viewloader Orion gun and I am having a problem with it. I just started out. Whenever I plug the FULL Co2 tank into the gun, it shoots three times and then it rapidly fires 2 shots like the Co2 is out. It can't be the tank because we tried 2 different tanks on 2 different guns. I have no idea what's going on, do any of you? TIA... Andrew.

**Gabriot** · January 8th, 07:59 PM

Do you have to recock after it shoots the rapid shots?

**AErdman** · January 8th, 08:01 PM

**tmaxx_2.5** · January 8th, 08:03 PM

im thinking your sear/striker are worn out..

**AErdman** · January 8th, 08:10 PM

What is that?

**tmaxx_2.5** · January 8th, 08:14 PM

i'll tallk w/ you on AIM..

**Zynister** · January 8th, 08:25 PM

Lube your internals, thats what I did when I had the problem with Spyders and such, just put a bit of lube on all the o-rings, and its fine.

**Pr0ph3t** · January 8th, 08:27 PM

maybe a chopped o-ring somewhere
sear is bad
lube it

many possibilities

**AErdman** · January 8th, 08:43 PM

What is the metal line called that goes from CO2 to the gun?

**Pr0ph3t** · January 8th, 08:49 PM

bottomline setup

**AErdman** · January 8th, 09:59 PM

On the top of my gun, right before the barrel, there is a plastic clip with two screws. I only have one screw in on it, can this cause the problem?

**matrix owner 1** · January 8th, 10:05 PM

GAS HOGG!!!!!!! lol i dont think it is the sear b/c the sear on my old dragun wore out a couple times and it doesnt rapid shoot. i hav had problems like this, sometimes it is a blasted o-ring, sometimes it is that an o-ring on the bolt is to big, or sometimes it's that it needs to be lubed. i would replace all the o-rings ($4) then lube it ($4 if u dont hav any) and there shouldnt be a problem.

i'm so smart...huh?

**Huey69** · January 8th, 10:38 PM

Quote:

Originally Posted by matrix owner 1

i'm so smart...huh?

No, becuase you just repeated what everyone else said.

Alpha · January 8th, 10:42 PM

O-ring on the bolt needs to be replaced. Maybe the hammer.

**Zues** · January 8th, 11:03 PM

Quote:

Originally Posted by AErdman

On the top of my gun, right before the barrel, there is a plastic clip with two screws. I only have one screw in on it, can this cause the problem?

No what you are talking about is the ball detent it keeps the gun from double feeding 2 paintballs in the chamber at the same time, there isnt any way this could cause the problem.

**Gabriot** · January 8th, 11:06 PM

Try putting in the o-rings and get back to us on what happens.

**matrix owner 1** · January 8th, 11:39 PM

Quote:

Originally Posted by Huey69

No, becuase you just repeated what everyone else said.

i'm pretty sure no1 said oversized o-ring.

**AErdman** · January 8th, 11:44 PM

I put in new O-Rings, nothing. I snapped the braided cable on accident, so I need to get another one tomorrow. I will just ask the brother at the shop. Thanks though guys!

Thread Tools

View more Paintball photos