elsavag3

I got a an old spyder semi auto 68 cal. And
Replaced all the o rings on it with regular standard o rings. But i tried shooting it.
And then the chamber fires real fast by it self and it only stops when i take the tank off
Also. I took it apart and cleaned it more and put it back together and it shot the first paintball
But then it would not recock on its own. I have to cock it each time. Im starting to think its the o ring
on the striker maybe it needs to be bigger and thicker. Any help would be greatly
Appreciated.

elsavag3

Also i got a stingray brass eagle. And i need to know the size of the o rings on
The tube that runs from the asa to the chamber. They are small but idk which ones i need. There are 2 of them on the tube.

martix_agent

for your tippman:
id you use the proper size orings? if you did not, then that's your problem.

Also, what sort of lube are you using on it? it should be paintball or air tool oil. No grease, baby oil, vegetable oil, etc etc

__________________

Feedback

.

elsavag3

Im using paitball oil. Im thinking that the oring on the striker is
A diffrent size. The rest of em look like they go there i will post pictures later
So you can see what my problem may be.

huckduck

the hammer o-ring is just a glorified tank o-ring IIRC

__________________

elsavag3

I fixed both guns. On the brass eagle it was the o rings i needed. Now tho
The brass eagle makes a loud sound when i shot it. Like metal hitting on metal
Is it suppose to sound like that?
And as for the spyder. What was wrong was the co2 tank. They didnt refill it at axademy.
I dont recommend academy for refills.