nathanistrate

I have a pretty old paintball gun a spyder Tl. I was shooting a couple balls and the suddenly i was just pressing the trigger and my gun is not shooting. So i try to pull on the bolt but it doesn't move i tried taking it apart but its just stuck. I need help because i want to fix it

Trbo323

sounds like something is just jammed in there. I would start by taking the detents out as they could possibly be doing it but more likely is you just have a piece of a paintball shell wedged in between the bolt and the body. usually you just have to muscle it out of there, you may want to try getting some paintball oil in there, do not use water though because if it is a piece of shell water will make it expand and it will just get worse

__________________

Everything, and I mean EVERYTHING, that makes a firearm better makes a paintball marker worse. They are 2 very different worlds with nothing except a trigger in common

martix_agent

yep. grab and twist! I had this happen once and it was a major pain to remove it.
water will expand it, but it will also soften it up

__________________

Feedback

.

Pro_paintball

needs to be cleaned, i had a rodeo and for the most part they are pretty similar. take out the bolt clean it then clean the breech and the rest of the area that holds the bolt

__________________
Nothing compares to playing pump or with a older marker

MedicDVG

otherwise you can take a dowel down the barrel and gently tap the bolt back out and then remove the debris.

__________________