sparktite

When i pump my phantom vsc its kinda sticky or like sticking and its too hard to cock... which it shouldnt be. I took it apart and cleaned it and its still sticking.
I also want to put a regular hopper and feed neck on the thing is that possible? cuz theres only one screw hole on the top

__________________

sparktite

i figured it out the spring was getting stuck like in the marker so i took it off lol but now i want a new one or something idk

__________________

the_real_kaz

ok... sounds like you fixed your problem, though I'm totally understanding what it was in the first place.

As for the feedneck and hopper, i'm pretty sure it can be done. You just need to find the right parts.

__________________

Mortisdeum

For the standard hopper your going to want to look for a center feed body. I have seen them for around $30-$100. depending on were you look.

Also if you get one, you will need on of the elbows like what goes on most spyders

__________________
Tippmann Owner #330, Smartparts Owner #63, Autococker Owner #208
Pump Owner (Latest Project Gun)

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod

Smartpart Mods:
Ion Foamie

Cocker Mods:
EZ Timing Bolt

sparktite

awww i have to have an elbow... than id rather play without a hopper lol

__________________

sparktite

it seems like if i found the right sized screw or something to stop the screw and then got a clamping feed neck that would work... cuz the tube feeding thing is on the top just has one hole instead of two and its not sliding around

__________________

sparktite

also i dont see pump accessories or parts selling at places like slothball or actionvillage or any sites really... is there a site where i can find parts or stuff or even just a list of things i could get so i can look em up

__________________