Thread Tools

**IMPULSEMAN101** · July 17th, 06:57 PM

Hey Yall Im not new PB, But New To the Pump scene.. Well My Local store is selling some Phantoms and This One Like Pictured is for about 300... Is it worth It..

**blackstarxxx** · July 17th, 08:09 PM

that right there you can get for 220 from http://www.archerec.com/modules.php?...=viewtopic&t=4 or go to whitewolfairsmithing.com and they can match the price from acherec

$300 is higher than the msrp

**IMPULSEMAN101** · July 17th, 08:51 PM

Q- If i Buy a Phnatom W/ a Bottom Line what Do Buy To Make It feed like the On in the Pic..

**IMPULSEMAN101** · July 18th, 03:07 PM

???? Any One Know..

**Christian** · July 19th, 01:33 AM

you mean the horizontal feed tube thats on top of the gun? you'd have to buy that.

**IMPULSEMAN101** · July 19th, 04:22 AM

Ya Like If I wanted to convert a Vert to a Horz Feed..

**blackstarxxx** · July 19th, 04:53 PM

oh go to the site i pointed out. I know you'd have to buy a horizontal breech and a 10 or 15 round stick feed with cap. you might have to buy a whole new body, i only play vsc so i don't know.

you'd have to spend over 35 for it new so you'd be best off buying it with the horiz. feed already unless you would like to play with a hopper sometimes.

***D_Smalls*** · July 19th, 10:44 PM

to switch from vert to horiz, youd need to own both recievers.. then you just unscrew it, put the guts in the other one and screw that one on.. not hard...

**Christian** · July 19th, 11:30 PM

Smalls - Is there any site that has pictures of someone doing that body switch? I need to know before mine comes. Thanks.

**Spyder3188** · July 20th, 09:35 AM

All you have to do is take out the valve, bolt, and main spring and put them into the new body. You would have to do this anyways if you wanted to clean. Here is a picture of my old phantom with a stock class body next to a phantom with a vf body on it.

**Christian** · July 20th, 12:51 PM

ok, but I haven't even got my phantom yet (should be another month til I do) and I haven't even seen one of these things in Utah. Does the back unscrew or something? How does it break down?

***D_Smalls*** · July 20th, 12:58 PM

k, see the attached pic.. where the red circles are.. those are thumb screws.. you unscrew those and the trigger frame comes off, then you cant take off the pump and the reciever comes off the back peice and you can slide the bolt/hammer out..

if ya need more pics ill get em

**blackstarxxx** · July 20th, 12:59 PM

if it's like the trracer, (i think so) you unscrew the screws that hold the trigger frame on the body. then the valve can come off the body, and everything off the trigger and such.

***D_Smalls*** · July 20th, 01:10 PM

well, its your lucky day because im bored and my phantom needed cleaning...

so step one.. look at your purdy phantom

***D_Smalls*** · July 20th, 01:12 PM

step 2, unscrew those thumb screws.. mm look at those hands.. look here boys.. those are man hands

**blackstarxxx** · July 20th, 01:13 PM

i thoguht your phantom was red? or is that just a 99 cent camera?

**Christian** · July 20th, 01:14 PM

smalls is cheap...give him a break. Thanks for doing this Derek....continue....

***D_Smalls*** · July 20th, 01:15 PM

step 3, gently pull the trigger frame down from the body, dont be rammy though, the hardline wont like you.

***D_Smalls*** · July 20th, 01:19 PM

step 4, now you can take the pump arm off.. super simple.. you jsut pull it down..

then you can slide the reciever off the back.. oh yeah.. take the barrel off before ya try to take the pump off.. cuz it wont work if ya dont.

***D_Smalls*** · July 20th, 01:23 PM

step 5, now you can slide the guts outta the reciever... thats all there is too it.. now if you were going to switch from horiz feed to vert feed, you would take all these steps so far then take the vert feed, put the guts in it.. put on the pump arm, then slide the reciever onto the back... now heres the part youll wish you hand an extra hand for.. you have to hold everything to gether and in place.. then line up the trigger frame and put the thumb screws back in...