snipermonkey2

I've had my Sniper II for like half a year now and I only got a new barrel and now that I got second job i can start paying for new things, so what upgrades do you think i should put in to in???

__________________
"Although hardwork may pay off in the future, laziness pays off now"

predator14

bolt,grip, almost every single part

__________________
And I heard, as it were, the noise of thunder: One of the four beasts saying: "Come and see." And I saw. And behold, a white horse. And his name, that sat on him, was Death. And Hell follwed with him.

Alpha

The Armson stealth bareel is rifled right? Get a new barrel. To use rifling properly you need something like 50,000 rpms. At that point you reach gyroscopic stability adn the paintball would fly straighter. However you can't get that number of RPMs on a 13" paintball barrel.

__________________

snipermonkey2

no the rifled barrel works fine thats why Armson is one of the best companys

__________________
"Although hardwork may pay off in the future, laziness pays off now"

MP11

You can upgrade a lot of stuff. Maybe get a new body (Docs Fastback ), new bolt, backblock, pullpin, cocking rod, new detent, new spring kit, new internals, a new feedneck, and maybe if you have extra cash get an E-Blade, no more short stroking .

About the bolded text, that is not needed if you do get any halfblock body.

-Mike

__________________

sNoW PIrAnHa

Exactly, its basically a cocker, maybe a smoother frame, new valve, new hammer, all delrin bolt, delrin back block. Basically every CCM upgrade that isn't mounted on the front block. A new inline would be awesome too.

__________________
"I have no mercy or compassion in me for a society that will crush people, and then penalize them for not being able to stand up to the weight"- Malcom X

Javaman

I wouldn't bother. Most further upgrades would give very little if any gain for the money. It's already a great gun. You're biggest gain would be from decreasing gas consumption especially if you are running on 12 grams. If that's the case try to remove as much expansion area as possible. However much gas that's used to pressurize the hoses, expansion chamber, and everything up to the valve is essentially wasted.

__________________
By the time a man realizes that maybe his father was right, he usually has a son who thinks he's wrong.

snipermonkey2

i run it on a normal tank of co2 and i don't have a hammer on it or a reg. so i don't know what to really buy for it

__________________
"Although hardwork may pay off in the future, laziness pays off now"

Javaman

A decent Co2 compatible reg like the Palmer Stabilizer would probably give you the best bang for the buck. Since you are running Co2 (850PSIish) try to get the operating pressure of the gun down to at least below 600psi preferably lower. This will get rid of the biggest problem with C02, the liquid chilling and causing the pressure to drop reducing PB velocities. Normally this really wouldn't be necessary for a pump since you would probably be firing slow enough to keep the pressure up, but you seem to be itching for an upgrade.

__________________
By the time a man realizes that maybe his father was right, he usually has a son who thinks he's wrong.

snipermonkey2

could you show me some web site where i can find all this

__________________
"Although hardwork may pay off in the future, laziness pays off now"

Javaman

Check out paintballforum.com I hear they've got a lot of good info in their stickies.
Good luck.

__________________
By the time a man realizes that maybe his father was right, he usually has a son who thinks he's wrong.

Spyder3188

If you want a smoother pump stroke get a ccm pump kit. If you want more firepower get a ccm slider or hinge frame and a autotrigger.

__________________
Pump gun owner #3
More guns than you.
Need a Cocker Frame, Body, Reg or Other Part? Hit my blog! FSP!
NEED TO SELL YOUR E COCKER FOR SOME QUICK CASH? DOES IT WORK? PM ME!
My Feedback