This is a project that I've been putting together, and it's in need of a few more things- But my goal is to make a pump cocker, interchangeable to a mech- Both open class and stock. A set, you see!
In the future, it will get a dual arm slot milled out,the rough cuts smoothed, and anno!
Specs;
-L-Stock
-Carter SS barrel
-CCM Pneumatics
-EVIL rail and ASA (for the time being, till the Pimp trade/sell)
-Belsales internals
-CCM pump kit
-ANS Gx2 reg
NEW PARTS
Noxx 10 rnd SC clamping feed
12g Bucket changer
Slik bolt
What color(s) should I have it in anno? I'm looking for ideas, I'd like to keep the pneus and trim silver.
Last edited by Maniac117 : April 28th at 04:46 PM.
how are we supposed to rate it if you dont have it complete?, its like rating a car without a paintjob, you can give it a 10 but then they will paint it flat brown and you would like to take your rating back and give it a 3
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
as for mods, new barrel, there are much MUCH lighter barrels on the market than a SS one
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
So the body will be the current color but any of the groves and P-block will be black.
Also keep the grip frame the raw color but put black grip plates on it.
I should have been watching this thread! I'll pay more attention now
Quote:
Originally Posted by jgilk1
maroon red....anno with the silver pneum's would look cool and a black out screw kit...
3/5 for a good looking project (will not rate it out of 10 for non completion)
I like it I wanted a dark color originally, that would just about fit the bill
Quote:
Originally Posted by PlayingWithFire
I'd rock it in bare aluminum, brushed or polished, but that's just me.
Bare aluminum would be alright, but if I end up selling to someone that wouldn't put as much time in keeping their greasy fingers off of it, I'll still feel bad.
Quote:
Originally Posted by Trbo323
as for mods, new barrel, there are much MUCH lighter barrels on the market than a SS one
I know there is. I have a Lucky 12" 2 piece with a stainless back, but this one somehow looks more classy?
Quote:
Originally Posted by Mortisdeum
I would say silver with black details.
So the body will be the current color but any of the groves and P-block will be black.
Also keep the grip frame the raw color but put black grip plates on it.
6 out of 10 for just the parts though
I DEFINITELY like this idea, Clear anno on the body, black to fill in the lines and cover the P block, and find a set of Kapp plates? Might be a winner!
At the moment, the body is at Jcurt's of MCB getting a light mill (smooth out the rough, and making matching vertical lines on the other side) and a dual arm slot cut.
...
I DEFINITELY like this idea, Clear anno on the body, black to fill in the lines and cover the P block, and find a set of Kapp plates? Might be a winner!
At the moment, the body is at Jcurt's of MCB getting a light mill (smooth out the rough, and making matching vertical lines on the other side) and a dual arm slot cut.
Good luck finding a pair of Kapp Grips as Kapp has been out of Business for almost 2 years now
But even a pair of black rubber ones would look good too.
Other then that you got a winner and I can;t wait till its done
Forgot to mention!
The tank that will most likely go with it for Mech conversion will be a silver Macdev Conquest, set in a Crossy 70/45 bottle. (getting a new hydro at the moment) I want this thing ultimately UNIQUE.
Lastly, I just got my hands on a Slik bolt, black 12g bucket changer, as well as a black NOXX 10rnd SC feed (clamping).
This is going to be one hell of a project.
MORTISDUEM- I thought I saw one on MCB, but i'll have to double check. I DO have a pair of Pachmyer (sp?) wood/rubber grips that might do the trick?
Belsales Evolution Minicocker
I wanted a dark color originally, that would just about fit the bill
I have a Lucky 12" 2 piece with a stainless back, but this one somehow looks more classy?
