bigyeah

I have been reading a lot of reviews and things for the WAS board and i am getting intimated (no pun intended). I do not understand what all of this FSDO actually means beside what it stands for, and this debounce, and dwell mean.

Can anyone help me out on what this stuff means and its significance to the marker, and how important it is to tweak these settings?

Roadkill

The WAS board is an electronic board designed by wicked air sportz, the latest version enables you to have psp and nxl legal ramping.

FSDO is first shot drop off, this means that your first shot after a few minutes of inactivaty will have a low velocity.

Debounce settings help eliminate bounce in the trigger. Bounce is when you pull the trigger once and it registers the pull more than once and therefore shoots more than once.

__________________
Black/Blue WDP 05 Angel Speed
Tippmann SL-68 II
Smartparts ION
2k2 Cocker
VSC Phantom

My aim = Roadkill1214
Tippmann Owner #27
Angel Owner # 48

bigyeah

Thanks those were the only things i knew though ... i was wondering how significant they are to the marker, because someone told me to never mess around with my dwell. Yet i still don't exactly understand what dwell does and how to prevent the FSDO and how to adjust the debounce.

Another thing i was wondering was what is the Rate of Fire cap that i am seeing on the WAS board?

jaggy13

check out the kamworld page linked in the ultimate sticky. it will describe most of this in refference to the stock boards. basicly there are a couple different causes for FSDO, the was board regulates the power differently and "eliminates FSDO".
Dwell is the durration that the hammer is told to hold the valve open (in milliseconds)
longer dwell allows for lower pressure operation but may lower efficiency.
shorter may get better efficiency but not be as consistent.
The best thing that you could do would be to write down what all your settings are now, so you can play with it and always have a "known working good" setting.
go check out the sticky, that page has some really cool stuff about your impulse.

__________________
MY FEEDBACK


1 cheap ION and one not so cheap ION

Don't Get Scammed! Use My 3rd Party Service!

Roadkill

On the WAS board you can adjust the rate of fire cap through the trigger. On the new cricket boards (the stock board) im pretty sure the rate of fire is capped at 20.

Dwell can be adjusted on the WAS board through the trigger. On the cricket board there are two buttons on the side that you push to adjust it. One is to raise it, the other is to lower it. These buttons can be used without taking apart the marker.

For instructions on the steps to adjusting the dwell on the WAS board, you need to read the WAS board usage manual

http://www.wickedairsportz.net/manua...sagemanual.pdf

__________________
Black/Blue WDP 05 Angel Speed
Tippmann SL-68 II
Smartparts ION
2k2 Cocker
VSC Phantom

My aim = Roadkill1214
Tippmann Owner #27
Angel Owner # 48

bigyeah

Thanks a lot guys! I am learning a good deal about my impulse and its pretty cool stuff. I have a few more questions that i will start in another thread so people don't get confused.

Skate and Paint

id just post those questions in here to avoid flaming haha

but dont be afraid to ask anything.

__________________
AO feedback
feedback