Sham3d

I am trying to take it apart, put another body on. But when I try to gently push the board up, it won't budge.

I'm don't want to use force, or take it into the proshop just to change the body out.

WTF can I do?

Here is a pic, of that shows any evidence (I can take a better one of you can help me):

__________________

Gangsta_Redneck

wat body u tryin to put on it??

this hapend to me the opther day i just pushed real hard on the bottom of the board and it came out (i am not responsible if you break it lol)

__________________

Pm6 werd..

Sham3d

Could it possibly be that the Board is to fat?

Reminder: I havn't taken the gun apart since the local proshop gave me a new board.

__________________

DragonFire0729

You have released the front lower Banjo, right?

__________________

Sham3d

OMG

hold on

Edit: dam it, nvm

HELP ME!!!

__________________

Sham3d

Umm, I've unscrewed the screws that hold the body down. That's it so far

__________________

Gangsta_Redneck

try to unscrew the hose goin to the reg thingy

then just put some force underneath the board (try to keep it even al the way across the board so you dont break and just push alittle it should pop out thats wat i did..(like i said befor eits not me if u break it

__________________

Pm6 werd..

DragonFire0729

Ok, unscrew 3 screws (barrel area, 2 frame screws) but then you need to undo the Banjo fitting that attaches to the reg (blue tubing)

__________________

Master Mike

u are pushing it up with ur thumb while gently pushing the body up right?

onesikpup

^^^^very likely to be correct....

__________________
FEEDBACK

Sittin_duk

Have you tried wiggling it around a little bit when you're trying to take it out? Sometimes my board will have troubles coming out and if you just wiggle it a little then it comes out...hopefully that will work for you..

__________________

butterjuice

u have to use force bc the slots that gold the board in are EXACTLY the same width as the board so it is a tight fit....

lift the body as much as u can and then grap the board with your hand and pull straight up...it takes some force but it will come out

__________________
We're not in it for the money, or the fame. The girls, sex and drugs don't come to us, like other professional sports. We play day-in day-out, sun rise to sun set, sunny or rainy; because we love to play. People question us for our devotion, our obsession to this weird sport; a sport they see as a hobby. It doesn't matter what they think; we play because we love to, because we were born to be a pro paintball athlete

Chattown Ballers
MYSPACE

Sham3d

Ok, I have those 3 screws unscrewed, and the Banjo screw doesn't have to deal with my problem.

I normally push the board/body up slightly to access the screw, then unscrew it completely, but this time, the board won't even Wiggle.

__________________

Sittin_duk

Hm...

Is the board crooked in the slot?

__________________

Sham3d

I don't think so.

pos

__________________

Gangsta_Redneck

u still aint got it?? wtf i dunno wat to tell you

__________________

Pm6 werd..

Nyarlothep13

I had this problem with mine once, it turned out the batter wires were in the way and were pinning the board to one side and not giving it room to move. Check and see if the eye-wires or the battery-wires are wedged beside the board.

__________________
"If you're not paranoid, you're not paying attention..."

"Ya know what? Paintball... is ****in' tasty!!!"

Smart Parts Owner #169