Setup:
T-board
Clippard QEV
Stage 1,2,3
Stage 1 is the old version LBM bolt.
Dwell is about at 20.
Video of problem:
http://www.darksidevideo.org/video/5...43011717ef.htm
Okay i decided to relube my LBM bolt and reassembled everything as planned. However when i shot the gun, the bolt moved forward but did not retract. So i shot one more time and my bolt moved forward and started to leak. I disassembled the whole thing again and check if any o-rings were damaged, none were. Well i lubed it up again and then assembled it. The same thing happened. I tried to use the stock bolt stop and the stock bolt but the same problem occured. The PSI input is low cuz im starting at 0. With one turn on the black nut on the stock reg the in put pressure goes up on the guage and nothing leaks. It only starts to leak when i shoot. I can move the bolt back with my finger and this will stop the leak. This worked about 2 weeks ago and im out of options. Thanks.
bolt problem
