Trbo323

ok i got a vision impulse and its having some issues that i cant figure out, it has the cricket board but for some reason it just decides when it wants to shoot and when it doesnt, (maybe its just that time of the month) I have narrowed it down to the cricket board itself, but have gotten no further than that really, I beleive it has a short somwhere but have no idea how to narrow it down any further, One thing that is happening also is whenever it doesnt shoot the blue light also wont work, dont know if that helps any, any body got any ideas?? Id rather try to solve it myself than pay $40 for some guy to tell me that its unusable and i need to buy a new board,

thanx for any help

Trbo323

ok never mind on that, i ended up ordering a new cricket board for $10, not a bad fix

xPiZZeRx

Adjust the trigger. If the light is off it means the trigger is contstantly holding down the microswitch, so just make the pull longer. lol, you don't need a new board.

__________________

poppasmurf15

^agree, sounds like it.

__________________
Bounce....Play-on!!!!

-<07 Ego w/SL74 upgrades>-
If you have been ballin for more than 2 days, and don't think that "AGG" is the coolest saying ever, put this in your sig.


Team Who Kares of The Bunker Extreme Paintball Park , Wyandotte, OK. Home of Oklahoma D-Day, worlds largest paintball game!

kenny_1491

you don't. my dads was having the same problem, all we did was put new eyes in there and replace te detents and it was all good, oh and check your eye power to.

__________________




Magenta for RB

txaggie08

it could also be a short at the switch, or a sticky switch. I would start with the trigger as pizzer suggests and go from there.

__________________
Proudest member of the Fightin Texas Aggie class of 08 Beat the h*** outa tu A Whoop!!!!.

If you need help, IM me. I'm around alot of the time and will answer questions happily . *Driftcav03*

RL timmy FS ultra cheap

Trbo323

well its a little late for all of that, i got the new board for $10 and they sent the vision board with it (SWEET!!), I know it wasnt the trigger causing it cuz i did most of my testing either with a ton of trigger pull or just with circut board out, even with it out every once in a while it would not fire, so it had to be a short somwhere or a sticky switch, either way its hopfully been fixed although my allen wrenches have disapeared so i cant get the old vision board out and the new one in also the trigger i ordered requires the trigger frame to be drilled and tapped .i think ill just have my local shop do that though