raiderofold1515

OK, i posted awhile back about recommended upgrades for an Ion. Now that I have the upgrades, I was wondering if there is a place online with diagrams etc on how to take this thing apart. I have taken the screws out of the trigger frame, but still seems to be held together by something. So a website with diagrams or step by step would be awesome. Also, what all would you keep lubed up in the ion? Is there anything special to apply more lube to that may wear faster than the rest? Just curious. Thanks in advance

ARagingRebel

did you take the screw out of where the barrel goes? there is actually three screws, 2 in frame, one at base of the barrel hole....read the instruction manual when in doubt.

__________________
Marker Set up: Trilogy Competition cocker.
eVLution 3 hopper
j&j ceramic 14 inch
superfly bolt




"I dont know about angels, but it is fear that gives men wings."

"...Through our last night ashore, drink to the foam..."

evolkers2003

Hm, take the 2 grip frame srcrews out, disconnect the battery.

Take the 3 screws our of the grip frame (1 once you remove the barrel and the other two are easly seen)

Push up on the board while lifting the body gently, dont do it too fast. Just enough to get an allen wrench to fit into the banjo fitting right about you regulator.

From their it should be pretty self explanatory and your manual should do just fine. Just be carefull with the hoses so you dont break them. Sometimes they can be very fragile.

P.s. This should be in the ION forum.

__________________

Sex on tv cant hurt unless you fall off.

GameOver

there's a full video on how to do this. I found it once searching on yahoo.

andyminION

plz plz plz plz plz plz
be careful with the banjo fittings.
if they brake then your screwed out of 40-50$
it is a common mistake where i live that a guy will ruin his gun in this process.
They use a special drill to get the broken part out that you wont have

gondi

There is a video here on the fourms. I think it is in the sticky about ions it is called the ion disasebaley video it is a very good step by step video.

__________________
"Wars come and go but my soldiers stay in turn"



#263
(set up)
06 Ion Blue body kit
halo B w/rip drive
Evo II egg (backup)
pure eng 3000psi 48cu
Lucky 13 barrel
Q lock clamping feedneck
shocktech drop on/off

www.superiorpb.com

gondi

this is the thread Ion Disassembly *Vids*

__________________
"Wars come and go but my soldiers stay in turn"



#263
(set up)
06 Ion Blue body kit
halo B w/rip drive
Evo II egg (backup)
pure eng 3000psi 48cu
Lucky 13 barrel
Q lock clamping feedneck
shocktech drop on/off

www.superiorpb.com