erawtik

I have an imp vision and it is leaking air at the brass fitting on the vertical adaptor. When i took it apart the piece looks like it doesnt allow to much air in the gun so it blows it out this part. So is this a part that need to be replaced or is there something that need ajusted?

Trbo323

that little brass thing is kinda important, i cant remamber the exact name of it but it is an emergency blow out incase the pressure into the regulator gets above, well i think its 750 it will vent out that insend of blowing out your noid.

I acually had the same exact thing happen to me last night turns out i had just screwed it in too far, put some plumbers tape on the threds and dont screw it in so far, if the leak is still there then it may be broke.

Brockocoli

yes. try some teflon tape on the fitting, also check to see what the input pressure of your reg is, as well as making sure your reg is lubed/cleaned and that no parts are corodded(sp) or flaking.

__________________
Team Widowmakerz
Tampa Bay Damage Fan