denbroncos526

there is air being released through the barrel of my impulse, i checked the valve assembly, bolt, solenoid, and hammer. all the o-rings are fine and there is nothing i can see that could cause this leak. it started from the solenoid, and after i fixed that i shot a half hopper of paint balls and then it started to leaker rapidly through the barrel. any suggestion?

Trbo323

if the noid was already an issue it might still be that, have you lubed up the hammer housing? perhaps some is getting by a ring there, by chance do you have the tapeworm installed?

martix_agent

sounds like a cupseal or valve leak. reset the cupseal int eh LPr and inspect the o-rings of the valve. It could also be the valve pin not sealing against the valve as well.

__________________

If your a Christian paintballer put this in your sig.

Pristine Promaster for sale $160!

denbroncos526

alright i fixed the leak that was coming through the barrel by lubing and replacing all o-rings, but now there is a leak in my solenoid. ive checked all the little o-rings on the spool,lubed it up, made sure i put the spring and gasket back in the right way, the gasket is in mint condition, but when i gas it up air keeps leaking ive tried everything. any help?

kenny_1491

Solenoid/gasket could be bad.

__________________

denbroncos526

if the solenoid being bad is teh case do you know where i could get one and how much it would be?

kenny_1491

Look in here, or try some part out threads on PBN:

New Impulse Part Trading Thread v2.0 - PbNation

__________________