SpYdErGuY7080

Hey i was walking my trigger today and all of the sudden the trigger doesent come back, (like i pull it but it doesent return) and i cant force it back, i want some help on what to do before i destroy the impulse i have had for less than a week.

CoolHipJim56

It sounds like your trigger spring might have binded. Take the noid tray off, unscrew the screw that holds the trigger spring in place, and check the spring for binding.

__________________


"Money can't buy happiness, but neither can poverty." - Leo Rosten

SpYdErGuY7080

its magnetic i probably should have mentioned

djj1973

You still need to remove the frame to investigate. It sounds like something is bound or part of you magnet shifted.

__________________

SpYdErGuY7080

ok i got it fixed, but now its a new problem, after i put everything back on the light no longer lights and when i pull the trigger it wont trip the little button that its suppost to hit. (and yes the battery is in for the light).

djj1973

It sounds like it isnt alaigned correctly

__________________

CoolHipJim56

I should have looked in your sig , If the magno trigger are the same as the none eclipse magno, then your set screw that hits the button must have wiggled loose. Screw it back in to your likeings, and make sure you loctite it this time.

__________________


"Money can't buy happiness, but neither can poverty." - Leo Rosten

bunkertime

If it's a Ndz, Then just AAdj. the Screw that contacts the Microswitch upwards, that or u put it back in wrong, but most likey you need to adj. the screw that contacts the switch up higher twards the switch.

If you have ne other Questions, AIM me at metallicafan9182

__________________
she's a virgin if u don't count anal


•••

SpYdErGuY7080

ok i finally figured it out, thanks to everyone who posted.