PBplayer

I am just wondering what are the must have tools to work on your Impulse and are there any tools that arent exactly necessary but just good to have?

Darkpaintball

Necessary Tools

1. A good set of standard allen wrenches- I cant stress enough how important that this is. The impulse uses several different sized screws so have an a set will prove best. Make sure you get standard and not metric. You can pic these up at a local hardware for several bucks.

2.Dow 33- Lube for your stock impulse bolt. Dont use it if u have an aftermarket delrin bolt. Sold on most paintball sites. Try xpaintball.com

Optional Tools
1. Hammer tool- made by new designz to hold make removing your hammer easier. Can be found on most paintball sites. try xpaintball.com

2.Crescent Wrench/Needle Nose Pliers- good for removing the 90* fittings for macro line. Found in all hardware stores.

3. Loc-tite- good to use if u have screws that arent stayin in place. Can be found at hardware stores.

4. Q-Tips- cleaning out paint in small spots or in ball detents. Found at conveince stores.

This is just what i had for my impulse. I always had any tool that i needed. Hope this helped

__________________

FEEDBACK

MuddinPede_98C

EDIT: He beat me to it.


Allen wrenches
Screwdrivers
Crescent wrench
pliers
dow 33
teflon tape
loc-tite
knife
any small pointy thing (dwell)
towel

I know there's more, but I just got back from playing and I'm wrecked.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

luisodude

well this is what i have an use

u absolutely need a set of allen wrenches that is definatley a must
a strap wrench
a paper clip is good for adjusting the dwell


o and muddinpie u said teflon tape if u read ur maual it says not to use teflon tape just use loctite

there is more but its already been covered

__________________
Imp sold
Tippy sold
DM4 sold
NEw gun- Blue proto, predator board, ccm mid rise, cp 2k5 on off, cp trigger, st!ffi

*******

MuddinPede_98C

I don't like loc-tite. Teflon tape is less messy, does the same job, and is easier to get off.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

bunkertime

The thing w/ Teflon tape is it can break off and Jam up the insides of your Impy, Causing major dro-off problems, and Can destroy your Noid, and will void your Warentee. And Blue loc-tite isn't that big of a deal to work with if you know what ur doing and don't be stupid w/ it

Also for Dwell, I perfer to get the Craftsman Set of allen wrenches from sears for like $10-$15 and use the .050 Allen key (smallest one. Also used to unscrew your eye ribbon) and adj. the dwell w/ it or a slightly larger allen key. this keeps from damaging the dwell button on the board w/ something sharp

And a Strap Wrench can save the day also a good bottle of Down 33. Also, don't forget some micro screw drivers for taking ur noiud apart when u need to.

__________________
she's a virgin if u don't count anal


•••

MuddinPede_98C

^Agreed. I use a $7 .050 for the dwell.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

bunkertime

i just buy the whole Kit so i have everything

__________________
she's a virgin if u don't count anal


•••

MuddinPede_98C

^ It was from my RC Car days.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

Impy28190

q-tips and that would be a good set

__________________

MuddinPede_98C

I actually have q-tips, just forgot to put em in there.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

Scientistblank

Teflon tape is frobiden for a Max-Flo and other parts of a impluse. I would know my local store owner is Darrel. The guy that coaches the All Americans, and he is a smart parts rep.

__________________
Impulse Owner #19


2k2 Impulse
Voddo bolt
Brass hammer
Eclipse Blade trigger
Rino Drop
16" all-american
Egg
68ci 3000psi steel

Once a Hornet Always a Hornet

bunkertime

lol, I know the Assistant coach for Detroit thunder..

Ne ways. This is gonna be a LONG post, but i will try and remeber and list everything in my tool box

a few dual 9vlt harnesses for halo
2 things os standard allen wrenches, 1 thing of metrix
bunch of different types of lubes and o-rings
2 Timmy or-ing kits, 1 imp o-ring kit, 1 spyder o-ring kit, 5 single gun trix o-ring kits, bunch of Cup seals, assorted screws and stuff
#1-3 phillips and slotted screw drivers
set of jewlers Screw drivers (tiny screw drivers)
blue, red, and green loc-tite
Liquid teflon (doesn't break apart and go into regs and stuff like reg teflon
some super glue that is stuck to the side of the main compartment (had a leak i think)
Some Sears craftsman ROBO grips w/ the kool pads on them (keep from scrathing stuff)
Manual for Timmys, Trixs, and Imps
a few rails, Drops, and on/offs
a bunch of duck bills (ASA's that come stock on Imps)
blue,red,green,clear,and black 1 foot peices of macroline
assorted 90* swivle, 90* and straight macroline fittings
Extra Impulse/shocker eye
bunch of Steel braided parts and hose
strap wrench
assorted color and widths of Electrical tape
and some other stuff

Oh. i also got nipple covers, Bunch of Q-tips, an old Y-board for an egg (for sale)
and some other Misc. stuff

I think my tool box wins, since i'm a gun tech

I also got a bunch of towels and **** too. LMFAO, egg shgells, clear halo shells that are broken, and some other ****

__________________
she's a virgin if u don't count anal


•••