Spyder_Pimper#1

ok on nation they have this sick imp iwant but it has a problem The solenoid's black wire has also become unsoldered but is being secured by electrical tape and a very strong adhesive. It is GAURANTEED to work perfectly. would that effect the performance is that bad can i get a new one and how much that would cost

xPiZZeRx

I think I saw a site with Impy noids. I forget wich, but I'll look for ya. Can't do it now though, my computer is being ghey and I can't go on alot of sites with pics for some reason.

__________________

P4IN7 B4LLS

all you need to do is re-solder it

but if he says it works fine now then i guess its alright.

__________________
JOSH.

FARSIDE KIDS

Spyder_Pimper#1

how do you re solder it and do you know how

tmaxx_2.5

you get a soldering gun and some solder, and just do it.

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

Spyder_Pimper#1

thanks

conbud

thake it to a local smartpart air smith its not that easy to repair if you havenever done it and you can get new noids for no more than 100$$ so i have been told

__________________

MuddinPede_98C

They are about $80.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500

bunkertime

www.airsolder.com has them... I think i spelled the site right.

they are about 60-80 bucks, But ask SP's, cause thier noids use HP springs,

Soildering ain't hard either.

__________________
she's a virgin if u don't count anal


•••

tmaxx_2.5

http://www.airsoldier.com/ nah <, thats it

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports