Thread Tools

**Impulsive_154** · August 24th, 07:51 PM

The vertical regulator on my Impulse is loose from the top, so I can wobble the whole thing left and right. It doesn't effect performance, but it's kind of annoying. Does anyone know how I can fix this?

**MuddinPede_98C** · August 24th, 08:27 PM

See the thin black nut on the reg? Loosen it a little. Then unscrew the whole bottom part of the reg off. The is an allen screw in there. Tighten it up after you align it. Screw the bottom of the reg back on.

See if that helps.

**Impulsive_154** · August 24th, 09:24 PM

No, it wobbles from the top of the gun, where the reg meets the gun, near the gauge.l

**paintballer05** · August 24th, 09:59 PM

yeah i am having the same problem...

**Impulsive_154** · August 24th, 10:02 PM

Yeah so is my friend and he ordered it from the same site as me... And now it's really annoying, it sways left right front and back more than 2-3 mm.

**paintbug** · August 24th, 10:09 PM

is the ASA where the max-flo screws in loose? if so you will need to take off the reg and tighten the screw that holds the ASA onto the body.

**Impulsive_154** · August 24th, 10:25 PM

Yeah that's probably it, but I don't know how to take of the regulator. Any and all help has and will be appreciated.

***xPiZZeRx*** · August 24th, 10:37 PM

1. Disconnect the Macroline hose. To do this, push in on the metal fitting around the hose connected to the regulator, and pull the hose out simultaniously.

2. Unscrew the regulator. To do this, push down hard on the fitting going in a counter-clockwise motion.

3. Tighten the allen screw that is inside the vertical adapter. To do this, get an allen wrench of the correct size, and place it inside the allen screw, and turn it in a clockwise motion.

4. Put everything back together.

**Impulsive_154** · August 24th, 10:40 PM

thank you all, I have cured the problem and tommorow i can help my friend out. The reason I needed help was because I thought it was just a circle inside the vert adapter, that's why your last comment helped so much.

**paintballer05** · August 25th, 07:51 PM

well do i have to take the gaage off or what.. im lost

***P4IN7 B4LLS*** · August 25th, 08:01 PM

Quote:

Originally Posted by Impulsive_154

Yeah that's probably it, but I don't know how to take of the regulator. Any and all help has and will be appreciated.

did you not understand muddins post at all?

***xPiZZeRx*** · August 26th, 05:43 AM

Quote:

Originally Posted by paintballer05

well do i have to take the gaage off or what.. im lost

It's simple. The gauge is attached to the vertical adapter, but you don't need to disconnect the gauge. Just tighten the screw in the vertical adapter. Did you even bother to take the reg off and look up there, or what?

**paintballer05** · August 26th, 06:08 AM

yeah i took it but i think i took off the wrong part, i took off the bottom half of the reg and i dont see an allen hole...

***xPiZZeRx*** · August 26th, 06:13 AM

Like I said above, you need to take the entire reg off.

Push down on the macro fitting after you take the hose off, and the reg should start to unscrew, then tighten the ellen screw that is inside the vertical adapter where the reg just unscrewed from.

**matt9119** · August 26th, 12:23 PM

yea its really not that hard...

**Impulsive_154** · August 26th, 02:07 PM

Quote:

Originally Posted by P4IN7 B4LLS

did you not understand muddins post at all?

Well, I don't know what kind of impulse you/he has, but that wasn't how I fixed it, so I guess no, I didn't understand it.

**MuddinPede_98C** · August 26th, 03:08 PM

It works for all Impulses. The only difference between mine and yours is that mine has a little milling.

***P4IN7 B4LLS*** · August 26th, 05:08 PM

what are you talking about thats not how you fixed it, xpizzer and paintbug said the EXACT same thing