SamGrizzy

I've used my impulse with CO2 like 3 times while waiting for my new N2 tank. On the third time the metal things connecting my drop forward to the hose and to the Max-Flo started leaking. Is that just a CO2 thing or something else. Because this weekend I'm gonna get my N2 tank filled.

Warpstoner

So the macro line connector is starting to leak? Yep this is caused by the CO2, using hpa should solve the problem if it dosen't, get a new piece of macro line that fits more "snug".

__________________
04 Green Viking #1880
2k1 Dark Angel Lcd

paintbug

macroline is like that sometimes. take out the hose and make sure that its cut straight and smooth. sometimes it just needs to be re-seated. if it continues to leak then you probablly will need a new fitting.

__________________


need some good links?? check my site!
Last update 4-3-04
http://www.freewebs.com/paintbug

My Feedback
http://www.paintballforum.com/forum/...43#post1872343

ZeRO eFFeCT

I had the same problem with that before. It was because my macro was straight and gave no move room. So when you gas it up and the marco takes all the pressure, the hose moves and eventually becomes loose causeing the it to leak out of the front of the metal piece. Just take off your macro and put it back on in there and wiggle it in there so its as straight as possible. Then it shouldnt leak.

__________________