pAiNtInYoUrFaCe

I got some parts for my impulse and installed them without a problem. I got an Eclipse Blade trigger, New Designz Equalizer bolt, and tapeworm. I shot it a ton after the parts were installed, no problem. Then I went outside the next day to shoot it and it was leaking from the solenoid area. I took the solenoid off and looked at it and everything seemed to be normal. So I put it back together and shot it... no leak. Well today I went to a field and it was leaking again, it shot fine but was annoying as hell and obviously wasnt right. Once again, I took it apart and it seemed normal but the leaking wouldnt stop. Does anyone have any advice on what to do before I have someone else look at it?

normalperson97

the pressure might have been turned up too high on the max-flo or there might be a problem inside the solenoid.

__________________
My Gun
________________
SP Shocker

Shocker#8917
Black
ND Vertical Adapter

bunkertime

noid gasket might be dry, try rubbing it w/ some dow 33, if it doesn't work, might need replacing...

__________________
she's a virgin if u don't count anal


•••

pAiNtInYoUrFaCe

i tried the shocker lube.. did nothing. if damaged, what would be some signs to look for? it still shoots no problem but the leaking got worse as i played so i just called it quits. I have never had the pressure above 200 btw.

bunkertime

signs would be it's real dry and brittle feeling, there will be hairlines fractures in it. Might also be a problem w/ the o-rings on ur noid, but i would replace the gasket first, most good shops, especially ones that sell SP parts should have a Noid gasket for like $2

__________________
she's a virgin if u don't count anal


•••

pAiNtInYoUrFaCe

i meant signs that the noid was damaged. I am going to replace the gasket hopefully tomorrow and ill post if what happens

bunkertime

if the noid is damaged, the gun won't shoot properly.

__________________
she's a virgin if u don't count anal


•••

pAiNtInYoUrFaCe

i got the noid gasket today, it helped but it isnt completely gone.. it seems like i cant get it to seal now because there is still a small leak coming from the area. I can wobble the back end of the solenoid back and forth.. i never really noticed that before because i never payed much attention but it doesnt seem normal, is it? i cannot get these screws any tighter.

bunkertime

hmm... might be something wrong w/ the body of the gun, or ur noid

might wana call SPs...

__________________
she's a virgin if u don't count anal


•••