Cali Guy 14

so is the was and the was takes liek 2 minutes to put in and liek a few to program

128shot

you can send it to a tech dude and he'll install it and everything for like 80 bucks if you buy the board seperate. Its worth every penny IMO, and i've seen morlocked impys and shockers go for a little more than your was'd guns.And you can just get the board through him and he'll install it and everything for 237 dollars

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Cali Guy 14

you have to put more into it tho. And i don't buy guns to sell em, thats lame and anyone who does this shoudl **** emselfs. I keep all mine.

128shot

Heh, usually if someone keeps a gun they're sure its not gonna be out dated or downplay their potential. such as angels, mags, trixs and cockes...

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Cali Guy 14

yeah dude but like i am not the kind of guy that buys a guy and sells it the next year cause it is a 2k3 not a 2k4. Most guns dont even change. So to me if it shoots and it runs to my liking i keep it till it breaks, then i fix it, and then if i can't i get a new one or a better one. Workign on my empire timmy for 800 new, wish me luck

Pr0ph3t

Ooooookay.

I've seen these boards in Spyders. They're pretty sweet stuff actually.

__________________
-Nick

ShIfTy3331

Good News:
I have been in contact with the guy offering installations, and he said "Prices will most likely go up after pre-orders." I asked him for an estimate and he said for the Impulse it will go up minimal if at all. So I going for this when I get the dough. Scratching the WAS.

__________________
SETUP:
-Smart Parts Impulse w/ Vert Reg.
-Smart Parts Magno Blade Trigger
-Smart Parts Protouch Grips
-Smart Parts Tapeworm
-Smart Parts All-American 14" Barrel
-Smart Parts Blackheart Board
-ACI Bulldog III 68ci 4500psi
-Halo B

128shot

you're smart, very smart. You'll have break beam eyes and the fastest impulse on the field. enjoy.

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Huey69

Uh....no. A halo b with V35 is faster thena reloader b. Try agian.

__________________
Taking a break....teamless for now

128shot

the reloader is sound activated and i'm 99% sure they will take v chip.

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Cali Guy 14

just cause of sponsorships i have to say empire is better. Go with empire.

128shot

what team are you on?

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

xPiZZeRx

Ya, I'm probably going to go for this too. I mean come on...break beams. Plus it's forcing me to get an I-Frame.

And bunkertime, there is also the V2.5 which is a little different than the V3.0. I think it's just the holes in it are different because they can take different boards. I'll ask the guy when the time comes.

__________________

Cali Guy 14

Whatever your choices. If your goin spend that much on a board you should have a few more things on your marker. You migth look at a new valve, new barrel, new hammer all that lil good stuff before you spend that on a board.

xPiZZeRx

I get atleast $400 - $500 on my b-day, November 5th. Then after that, it's atleast $500 on Christmas.

It's a pretty big family, and it's pretty much the only way I can get cash.

I need to find a job somewhere.

__________________

128shot

certainly is a big family...might i suggest something then? unless you dearly love your impulse, i have another option for you. PM if you're interested.

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Huey69

Who cares if the reloader is sound activated. And i'm a 110% positive the reloader will not take the V35 board.

__________________
Taking a break....teamless for now

128shot

for some sound activated is nice and you don't have to worry about an eye not reading the paint. I'd take an oddyessy over an empire espacially now since empire doesn't take v35

__________________
Some people are against capital punishment, because they say that it turns the state into a murderer. I'm against imprisonment, because it turns the state into a gay dungeon-master.

When I was a kid, I used to pray every night for a new bicycle. Then I realized that the Lord, in his wisdom, doesn't work that way. So I just stole one and asked him to forgive me.

Cali Guy 14

i liek empire b or egg 2. I don't like sound, they can misfeed if hit just right.

xPiZZeRx

Sent this email yesterday...

"Hey. I've been thinking about sendimg my Standard Non-Vision Imp into you to get the KM2 Predator Morlock installed/setup.

The board sounds insane.

I've read all of the information you have on your site. Very nice site might I add.

I was just wondering, since all of this is a permanent job to the body, and grip frame, etc., then before I send in my Imp to get this done, I was planning on getting either a V2.5, or V3 I-Frame since if I just sent it in with the stock frame, I can't put the I-Frame on without working on that too. So which one would be best for the board? The V2.5, or V3?

And I want the break beams. If I got them, is it possible to put an eye cover over the heat wrapped wires? And do you think I could eye covers to fit both sides if I can?

Also, what would the prices be if I wanted the board, with the break beams?

By the way, the specs are:

- Smart Parts Standard Non-Vision Impulse - IMP030115
- Smart Parts Vertical Max-Flo Regulator
- Smart Parts Max-Flo LPR Kit
- Smart Parts 12in. Progressive Barrel
- Smart Parts Impulse Gel Grip
- New Desingz Flush Length Equalizer Pro Delrin Bolt
- New Designz Adjustable PRO-MAG Trigger
- Viewloader eVLution II Agitating Loader - Propellor Modification
- 68c.i./4,500p.s.i. Crossfire HP Preset Carbon Fiber Wrapped N2 Tank System

And what are all of the things that you would do to my gun if I sent you it? Like drilling, and setting it up, and stuff like that?

I plan on sending it in some time in November hopefully, that's when I'll have the money. Then later, in December, I plan to buy other upgrades like a barrel kit, internals, etc.

Well, that's all I can think of right now. Thanks alot if you can help.

~Josh"

Got a reply today...

"Hello

The full installation of the board with a beam-break eye system, external power switch, and 25-g trigger microswitch would cost $276 (return shipping included). I don't konw if you've seen the Morlock board installation page on my website or not but the above price is from the new pricing system, which will take effect on October 1. The price also includes "a" NEW DeSIGNZ metal eye cover and a pair of NDZ detents as well (color of your choice, of course). What I do is drill through the body so the wires on the right side of the body come out the left side and are also covered by the Vision cover on that side.

Without going into too much detail, I will just say it would be easiest if you got the new frame before you sent it in. You wouldn't even have to install it if you didn't want to, I can do all that.
Installation involves mounting the new microswitch, drilling for the power switch on theback of the circuit housing, drilling for the new LED (which can be placed just about anywhere you want), and of course the eye milling. Although the holes would obviously be permanent, the board can be removed if you so desired.
I will set the gun up to work with the new board...which means balancing dwell, input pressure, and LPR pressure to maximize efficiency and consistency and all that good stuff.

YDNA"

Sounds alright. You think it's a little pricey for the board, break beams, installation, drilling, LED light, power switch, shipping, eye cover, ball detents, setting the board, and the gun up, and a new microswitch? Doesn't seem all too bad when you think about it.

Didn't help much on the I-Frame ptoblem. It's just that i don't want any unneccessary holes in the frame.

__________________