Presidente

"Very Important. The Eclipse Magno-Blade Pro is for use with the Impulse and Shockers with the new LS boards only. It can only be used with the latest style frames with a VERTICAL trigger spring. This trigger should not be used in Shockers with the old style, dome-switch, circuit boards. If your frame does no have the UNF hole tapped through the frame from the top, it is possible to drill and tap your frame to accept the magnet holding screw down into the frame. But we recommend that that is done by a qualified air smith."

This is some info for the eclipse pro magnetic trigger for my impulse...will it fit?

__________________
Git-R-Dun Dubya!
Impulse|Reloader B|68/4500 HP Crossfire|video

Thanks Snip3r for this sweet banner!

paintbug

if you have a cricket board, and one of the newer frames 2K3 and up, then it will work with no mods.

__________________


need some good links?? check my site!
Last update 4-3-04
http://www.freewebs.com/paintbug

My Feedback
http://www.paintballforum.com/forum/...43#post1872343

bunkertime

basicly, when you take ur gun apart, take off the noid tray, if there is an allen key hole above the trigger then ur ok

if you don't, then i got a buddy that can sell u an impy frame

__________________
she's a virgin if u don't count anal


•••