Thread Tools

**Loxy** · August 1st, 01:11 PM

Has anyone ever seen or operated a Misfit in action?
Ive heard they are pretty good and its in my price range >_<

**Zeotranatix** · August 1st, 04:15 PM

they look like any other spyder clone
go for it if u want it
but i say u jsut get an electric spyder and not a clone

**gil_ong81** · August 9th, 09:00 PM

heard of a guy around me who recently bought one. very decent out of the box.

was encouraged by a few to look into it as a replacment, but haven't gotten around to it yet

**TheConMan41** · September 2nd, 06:11 PM

Eeh, they're okay.

Just okay.

I've shot one, and pretty decent out of the box. But go with a Spyder.

**ShotgunWeddingz** · September 8th, 12:12 AM

For the price, the marker has a high rate of fire. It's decent out of the box, but I'd change out the Grips, throw a Rail and On/Off on it, and of course change the Barrel. Other than that, it's a nice beginner marker.

-Weddingz

**2ffu** · September 10th, 10:58 PM

man i luv that marker. i can rip the stock trigger so hard. cp barrel, cp reg, revy, and you have a decent marker

**procarbine98** · December 21st, 04:10 PM

i've seen and shot a misfit. a kid i play paintball with has one. it's pretty nice out of the box. i personally think they look great but i don't feel its much better than a spyder if better at all. the misfit does has better range than a spyder though.

***Born2drive*** · December 25th, 06:52 PM

Isnt it the same price as a BKO?

Hint hint...

**2ffu** · January 5th, 10:40 AM

Quote:

Originally Posted by Born2drive

Isnt it the same price as a BKO?

Hint hint...

2k4 bko-300
misfit-180

***Born2drive*** · January 18th, 01:19 PM

You sure about that price? I remember reading about it in APG or somewhere and it said it was priced around 300... Might be wrong though

**Hale** · January 27th, 12:30 PM

It's about 180. Some places have it for 160 to 170 but hard to find it that cheap.

Lionheart · January 28th, 10:09 PM

3 people i play with have them, in truth they are spyders with a slightly higher capped board. When the 3 kids first got them all three had different failures of some type. After the problems have been worked out they have the same maintenece of a spyder. What did impress me is the stock barrel which is very accurate.

***newbie86*** · February 6th, 01:27 PM

syndicates r pretty sweet looking guns with what sounds like a bit of power for ur buck but one Q r they a high pressure or a low pressure gun?

Lionheart · February 14th, 07:40 PM

high not worth the cost though

***newbie86*** · February 16th, 05:14 PM

worth the cost they're pretty cheap guns man!

***synMISFIT*** · March 3rd, 01:30 PM

The misfit is usually around 199.99 and if you have ever held one you would know they are not cheap. also if their was ever a problem with a misfit all you have to do is contact syndicate and they would always service the gun usually for free and syndicate only takes about 24 hours to get the gun teched and shipped back out. not months like some companys(ie. ICD, Smart Parts)

***Chupathingy*** · March 3rd, 01:59 PM

F.Y.I The misfit does run on lower pressures then Spyders and other "clones" i have got mine down to 250psi with only minor tweaking.

***jmcc*** · June 16th, 11:26 PM

one question could u put a spyder e- trigger frame on a misfit? thinkin about rocking trigger.........

Enigma LPA · March 24th, 11:53 AM

Quote:

Originally Posted by jmcc

one question could u put a spyder e- trigger frame on a misfit? thinkin about rocking trigger.........

Have you ever gotten an answer on that question?

**** i still got my Misfit picked it up back in 2004. I still love this marker!

**kenny_1491** · March 24th, 12:31 PM

I'm sure you can, as long as you don't get the VS one.