teamturbo

Hey guys.

I got a brand new RT today from an online store. First off, I'd like to comment on the instructions- they are kind of crapy even though I installed the entire thing without a problem.

So, I put my gun back together and I go outside to shoot. I cock and bam! Shoots like normal. The RT chamber did not fill. So, I grab a FLAT HEAD screw driver and turn the screw NEAREST TO THE GRIP and turn clockwise as the instructions state. Still the same thing. The gun fires, but the RT chamber won't fill up and it shoots just like stock. I can't seem to figure out what the problem is! Am I adjusting the wrong screw? Do I have to adjust the screw nearest to the hopper?

Please let me know!

Torch

Turn the screw counter clockwise until it stops. Gas up and pull the trigger a few times, it should beome very hard to pull the trigger. If it does not become hard to pull, you have a leak.

If you're leak free, turn the screw clockwise until you reach the point you like.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com