enalsisiht

i was reading the sticky on the r/t and it keeps mentioning sweet spotting. what is this.

__________________

^^^^^^^^^^
thanx DOGPATCH

Smitty

Thats where you hold the trigger in the right spot on a tuned RT and wrech havoc at 15 bps. Once you get the feel for it, you can hit it on a dime.

__________________
Rate my Gun
Smitty's Feedback 5+/0-
I DONT SHIP FIRST~~Unless you have good PaintBallForum.com feedback.
I could give 2 sh*ts about any feedback from the nation
or somerandom13memberPBforum.com

enalsisiht

ok so if i get the 98 custom with response trigger and tune it to where i hold it in one spot it will shoot at least above 10 bps. i need something faster for the style of woodsball which i play.

__________________

^^^^^^^^^^
thanx DOGPATCH

Mortisdeum

IF ya need it faster then 10 BPS I got a few tricks that I can do to improve on the rate of fire and lower the operating pressure. (some of them require that I remachine some parts)

PM me for details or if you have an questions

__________________
Tippmann Owner, Smartparts Owner, Autococker Owner, Pump Owner, Seridan owner, Automag owner... Gun Collector

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod
Smartpart Mods:
Ion Foamie
Cocker Mods:
EZ Timing Bolt

Smitty

Yeah man the RT ripps, You can get over 10 bps without sweetspotting. There a ton of RT tuning posts around.

__________________
Rate my Gun
Smitty's Feedback 5+/0-
I DONT SHIP FIRST~~Unless you have good PaintBallForum.com feedback.
I could give 2 sh*ts about any feedback from the nation
or somerandom13memberPBforum.com

Mortisdeum

how does 17bps sound?

If ya dought me check this only problem was i did it with co2

__________________
Tippmann Owner, Smartparts Owner, Autococker Owner, Pump Owner, Seridan owner, Automag owner... Gun Collector

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod
Smartpart Mods:
Ion Foamie
Cocker Mods:
EZ Timing Bolt

enalsisiht

well i use co2, wow that is pretty fast. i would definatly want to do that.

__________________

^^^^^^^^^^
thanx DOGPATCH

CustomProDude

With my A5, the sweet spot is so easy for me to find.

Everyone else is like "ZOMG I CAN'T FIND THE SWEET SPOT", but I guess I'm weird.

__________________
Tippmann Owner #283!





Tippmann A5
Flatline
Adj. Stock
Response Trigger
Remote Coil
20oz CO2
Military vest, 4 AK47 magazine pockets
V Force Armour thermal goggles
JT Premier Black Jersey Top
JT Tournament Pants
JT Premier Gloves

Mortisdeum

some times it takes a little adjusting to find the right spot for you

__________________
Tippmann Owner, Smartparts Owner, Autococker Owner, Pump Owner, Seridan owner, Automag owner... Gun Collector

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod
Smartpart Mods:
Ion Foamie
Cocker Mods:
EZ Timing Bolt

doyoufeelityet

yea i also have a R/T on my A5.....i dunno, maybe im not adjusting my gun right but i can't find the sweet spot......i think when i do it'll only shoot like up to 5 balls at a time???? somtimes it'll shoot 2 or 3 burst...is it because im using co2??? HMMMMMMMMMM..... is there a way to tweek my r/t a special way or anybody got hints for me to do it....any suggestions would help...thanks....

Smitty

A full tank of CO2 should rip the RT just fine. I shoot ropes with mine. When it comes to CO2, I only drop down to about 2 shots per pull when the tank is damn near empty. But with HPA I get full response all the way down until the gun fails to recock.

Basically the tuner is a thumbscrew with a locknut. Loosen the locknut. Back the thumbscrew all the way out almost. fire a few shots and tighten the thumbscrew. repeat this until after a shot the RT piston returns firmly against the back of the trigger, give it about another half turn then tighten the locknut. The trigger pull should get a little heavier, that gives you a resistance to balance. What you want to do is, hold the trigger against the resistance basically hold the trigger halfway back and balance it against the pressure. How far you pull the trigger back is the controlling factor on the RT's rate of fire. There is a certain length of trigger pull that runs the RT wide open. Once you figure it out your rate of fire can be whatever you want because you know the different spots to hold the trigger. I hope my rambling was more helpful than confusing.

__________________
Rate my Gun
Smitty's Feedback 5+/0-
I DONT SHIP FIRST~~Unless you have good PaintBallForum.com feedback.
I could give 2 sh*ts about any feedback from the nation
or somerandom13memberPBforum.com

enalsisiht

yeah it was extremely helpful, i am about to order my 98 custom and response trigger. my freind just got his and i tuned it for him.

__________________

^^^^^^^^^^
thanx DOGPATCH

sylisgood546

is the sweet spotting like a spot on the marker thats is the best or is it chosen by the owner to give what they want to put out and how fast they want it

paintballfan01

i have a 98 custom with a rt and it is no prob finding the SS. but i run out of balls in 7 sec with the rt and the halo b.