a guy at the pro shop told me that the cyclone feeder is the fastest loader out there...and he wasn't trying to get me to buy it...i got it online
__________________
Tippmann 98 custom
-12" CP classic one piece barrel
-Double Trigger
-Tippmann drop forward
-Cyclone feed system
-68/4500 Pure Energy HPA tank
Eclipse Etek 2
-Empire Reloader B
a guy at the pro shop told me that the cyclone feeder is the fastest loader out there
You should tell the shop manager to quit hiring n00bs.
__________________
I don't own a paintball gun and I havent played in 3 years. I've officially retired to Lounge Rat Status. Thank you for your understanding
yeah ive heard of this before, but it had a nail involved, cant remember where, but if you could slow it down that much, wouldnt velocity be affected?
__________________
Autococker owner # 186
WGP Superstock
16 inch barrel with All American front and Freak back
WGP twist lock feedneck
FreeFlow valve
Empire Reloader II Hopper
Pure Energy 45/45 hpa tank
NXe bottle cover
I don't think so. I mean, you're just messing with Trigger springs, not velocity springs.
And WhiteLightning, it's the fastest STOCK hopper. It's definately NOT the fastest hopper in general. Cyclone is ment for 17 BPS, give or take.
__________________
Tippmann Owner #283!
Tippmann A5
Flatline
Adj. Stock
Response Trigger
Remote Coil
20oz CO2
Military vest, 4 AK47 magazine pockets
V Force Armour thermal goggles
JT Premier Black Jersey Top
JT Tournament Pants
JT Premier Gloves
Quote:
Hey gyuz i r teh n00b to p8ntb4ll and i hve a intimidator wut kind of co2 can shuld i use 9oz 12oz or 20oz!!!!11!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Im doing this to my 98 as i type, results will be posted soon.
EDIT:::
Hmmmm... mine only shoots 3 shots then doesnt recock, almost like im out of air, but im not, also the trigger pull got hella hard, any idea on why it isnt working for me?
__________________
OSU
Last edited by tippyninja : April 9th at 11:06 PM.
I don't think so. I mean, you're just messing with Trigger springs, not velocity springs.
And WhiteLightning, it's the fastest STOCK hopper. It's definately NOT the fastest hopper in general. Cyclone is ment for 17 BPS, give or take.
I am messing with the drive spring by finding a way to adjust the tention on it
(Think oversize rear velocity adjuster)
Also I don't think the cyclone feed has been tested with a gun running this fast or pressure (not high and not low Some were in the middle)
Quote:
Originally Posted by tippyninja
Hmmmm... mine only shoots 3 shots then doesnt recock, almost like im out of air, but im not, also the trigger pull got hella hard, any idea on why it isnt working for me?
That is basicly what I am causing the gun to do but in a much more controled fashion.
I am guessing you don't have a reg and running your gun off a CO2 tank. If your going to do this Mod you must use a HPA tank or else you going to run into frozen tanks and other problems
Also there are a few other unseen mod that I have done to my gun that are not in any picts. I plan on keeping them under wraps for a while
Quote:
Originally Posted by jhick40
no offense, but he hasn't totally perfected it yet. let the master figure it out.
So I am the master?!
No I am far from it
I am more the guy that goes "I wounder what hapens when I do this?" or "how could i do that with this?" about half of the time stuff tends to blow up or not work.
Time for a little up date.
After oiling every thing up desided to runn this till it died Well it's kept going till I ran out of air in my 68/45 and went for a good while (I should have timed it)
Well the result of this was that it's good till the air runs out and on the other hand it will turn gun oil into a black gummy that will colect were ever air is vented from the gun. aside from the barrel for some strange reason I wil;l post picts oncei find my cammera's cable
Spring is still there, the bolt is worn down a bit, but no enough to affect it, sear is practically new
the bolt is the part of the gun that pushes the ball into the barrel.
So i don;t see how that will affect your new sear.
But if your Hammer is worn then that would afect if the sear will catch
The other thing i though about is the pressure your operating at cause if your using a HPA and no other reg then you runing at about 800 PSI and that is throwing the hammer back harder then on my setup wer i am running at 550 PSI. That is causing the the Hammer to "bounce" off the the end cap. and the fact that your hammer may be worn may not be helping this any
the bolt is the part of the gun that pushes the ball into the barrel.
So i don;t see how that will affect your new sear.
But if your Hammer is worn then that would afect if the sear will catch
The other thing i though about is the pressure your operating at cause if your using a HPA and no other reg then you runing at about 800 PSI and that is throwing the hammer back harder then on my setup wer i am running at 550 PSI. That is causing the the Hammer to "bounce" off the the end cap. and the fact that your hammer may be worn may not be helping this any
I know but he asked about the botl, the hammer is a bit worn, but again not enough to affeect it i belive. I will find my digi camera and take some pics. Also, think polishing internals will help?