Thread Tools

**Mortisdeum** · April 22nd, 08:10 AM

Quote:

Originally Posted by paintballer900

Thanks for the info, i might have craped up my gun if i didnt read that although i cant use it today because of i dont have my qloader yet butwhen i get it i will. How fast does the e-bolt go? because you can use that with co2 so if we slow it down to that rate do you think it would work better/ and or not freeze my tank up
EDIT: mortisdeum do you code for computer? that formula looks like some VB or some C i dont know much about it but

Ya
VB, C++, Visual C, Java, HTML, PHP, MYSQL, and NC (used for CNC machines)

As for the Electronis do you mean the old school E-Bolt, or the newer E- Trigger?

Bolt

And the trigger

paintballer900 · April 22nd, 08:32 AM

I guess the trigger i looked up the speed but it was so damn slow... it was 10bps at its fastest for the 98c. 15bps would be even better but i might as well just get a HPA setup but i like the little like 5 shot bursts i get out of it right now. But im not playing today cause its raining to much it got cancled ><

-- awesome i only know how to code in LUA(pathetic coding lol) but still u can make some cool stuff in it and compile it i heard

paintballer900 · April 22nd, 01:55 PM

Mortisdeum how did you lower down the rate to 23bps?

**skapunkin** · April 27th, 09:59 AM

Mortis how is it going? Any progress?

**Mortisdeum** · April 27th, 10:06 AM

Quote:

Originally Posted by skapunkin

Mortis how is it going? Any progress?

Progress?

Ummm........

*Quickly finishes his midterms and runs home to do the milling*

Kinda been bussy with college

**nickxjones** · April 30th, 08:23 AM

how goes it now mortis, still got midterms?

**Mortisdeum** · April 30th, 11:53 AM

Quote:

Originally Posted by nickxjones

how goes it now mortis, still got midterms?

nope just wrote up how to modify the CRX

And I milled the slot but I need to replace my vertical adatapor because I have fpund out that It has stared to leak badly even after i used some locktight

So I should have a test run done after I get the replacement part shiped

***spinny2559*** · April 30th, 08:00 PM

Ok, I'm new to these forums but anyone here whose in the PBN forums knows me probably, but what cycle time do you have it down to, or is it still blender speed?

**Mortisdeum** · April 30th, 08:23 PM

Quote:

Originally Posted by spinny2559

Ok, I'm new to these forums but anyone here whose in the PBN forums knows me probably, but what cycle time do you have it down to, or is it still blender speed?

THe last time I tested it I was down to ~0.05 sec for each cycle (23 CPS but it may be lower cause of a bad recording and an echo) and it had some wicked kick though.

So a halo might be able to keep up.

Right now I am working on reducing the amount of kick by remilling the slot and a few other things i still got planed, I got to fix the jig to do one thing though but after words I should be able to flip the cocking rod so its on the other side. (I bet a few people that are left handed might like that)

***spinny2559*** · April 30th, 08:44 PM

How did you lower the cycle time on yours?

**nickxjones** · April 30th, 08:45 PM

by the way mortis how do you get 18 bps semi on your 98c

paintballer900 · May 1st, 08:23 PM

I dont think he want's to tell his secret's lol

**paintballin34** · May 1st, 09:08 PM

Alright.. back to your full auto mod.. to much to read.. but if you didn't get it working right you need to find a gun smith to help you out. Bet there are a lot of them that would like the challenge of it..

**Mortisdeum** · May 1st, 11:05 PM

Quote:

Originally Posted by paintballin34

Alright.. back to your full auto mod.. to much to read.. but if you didn't get it working right you need to find a gun smith to help you out. Bet there are a lot of them that would like the challenge of it..

O it's working...

Just a little too well

At this moment I am trying to find a working diagram of the Tippmann FA because it was a full automatic gun and it was based off the Pro Carbide. (And that gun is simular to the 98 in construction) Mostly to see if there is another way to control the rate of fire.

There are a few ways that I have tried and to an extent work are:

Ajustment of Pressure the Gun operates
Removal/ Replacement of the Hammer O-ring
Ajustment of the tention on the drive spring

But each of those has it's own drawbacks as 2 of them also affect the velocity of the ball

So lowering the ROF is proving to be more of a balancing act or timing of a auto cocker

**Smitty** · May 2nd, 07:38 AM

Mort dont keep beating yourself up man. Like I said when this thread started it cant be done. We have all been down that road. It always leads to the same dead end. Electro or RT is the only way man.

paintballer900 · May 2nd, 08:40 PM

Mort i have happened to find this schematic it's of the old tippmann SMG, also full auto and like the tippmann 98 check it out here : http://www.vintagerex.com/pics/gunpi...0schematic.jpg

***spinny2559*** · May 3rd, 11:12 PM

Quote:

Originally Posted by Smitty

Mort dont keep beating yourself up man. Like I said when this thread started it cant be done. We have all been down that road. It always leads to the same dead end. Electro or RT is the only way man.

Don't discourage him, I know I'm not the only one who is able to figure this out.
/dogdy

I would explain, but PBN has gotten the better of me tonight, maybe tomorrow.

tv1000s · May 5th, 04:15 PM

if you cut a few coils out of the stock spring and streched so it is the same length as a unmodified stock spring will that slow it down some?

**Mortisdeum** · May 6th, 12:59 PM

Quote:

Originally Posted by tv1000s

if you cut a few coils out of the stock spring and streched so it is the same length as a unmodified stock spring will that slow it down some?

It would
But
Don;t do it

Never cut and then strech the drive spring because it will weaken it and it will eventualy break

tv1000s · May 6th, 07:46 PM

Also i know that on a car if you heat up the springs thay get soft would that work on a spring for a tippy i dont know. and i saw the you modded up your valve. i would try it with a stoclk valve and remove all your mods so your 98 is as close to stock as you can