Thread Tools

**PaintBalla 98 C** · June 28th, 03:03 PM

I am not sure if this is the rite forum or not but anyways...

I got a 32 Degrees Universal Drop Forward and I was wondering if the gasline from the GTA expansion chamber would fit or would I have to buy another one?

**b_heald** · June 28th, 03:15 PM

how big is the drop?
unless u measure it out and such you cant tell till it gets on the gun
you will probly have to buy a macro line kit for your gun

**PaintBalla 98 C** · June 28th, 03:50 PM

The drop is about 6 inches

**KevinTheCake** · June 28th, 03:59 PM

You will probably have to buy another. Macroline is a nice alternative because you can cut it to just the right length. If you dont like macroline, put your drop on the marker and measure the distance with a piece of rope. Make sure you arrange the rope like you would want the line to be with no kinks. Then order the appropriate braided line length.

**PaintBalla 98 C** · June 28th, 04:28 PM

What exactly is a macroline and where can I get one

**b_heald** · June 28th, 06:05 PM

its a hose and 2 fittings
u buy them in packs of 3 hoses and 2 fittings
you probly will need a 90* fitting and a strait
you can cut the hose to the lenght you need

Flatliner105 · June 28th, 07:37 PM

it should work...look at my old tippy pic and see if that is the same drop/expantion chamber...this should help you...you just need to curve the line....

**PaintBalla 98 C** · June 28th, 07:59 PM

Is that a good one? And if it is where can i find that x chamber and how much is it??

and yes...the drop is da same

this is the one i was talkin about:

X chamber

can you curve this line like dat one?

Sorry if these are too many questions